D-Link Forums
The Graveyard - Products No Longer Supported => DIR-655 => Routers / COVR => Europe DIR-655 => Topic started by: Retis on April 24, 2011, 01:01:32 PM
-
Hi,
I have an DIR-655 hardware version A2, my firmware version is 1.21, when i try to update the firmware of my DIR-655, he accept the .bin file(1.32.B01 version on french site ) a message says update please wait(or something like that) after the reboot. the version is still 1.21.
Other problem, when i try to change an option the DIR-655 reboot but nothing change and the modification isn't took.
Best regards
-
Hey Retis,
I had the "issues" with this fw...see this for solution (http://forums.dlink.com/index.php?topic=5176.msg53184#msg53184). Hope, this will help.
regards
-
1.2x -> 1.3x is a major update. Do a Factory reset on the router. Flash the firmware and then reconfigure the router manually, DON'T use a saved config. You may see issues when using a saved config.
-
1.2x -> 1.3x is a major update. Do a Factory reset on the router. Flash the firmware and then reconfigure the router manually, DON'T use a saved config. You may see issues when using a saved config.
Yeah, that is true (but I didn't had problems using older configs) - you could avoid it if you -like I had done it- upgrade through the whole firmware history. But the point was that the 1.21 fw does not save anything after the first setup - even not new firmware. So, you are forced reset the router, upgrade to newer fw and then reconfigure it.
regards