• April 27, 2024, 12:12:37 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DNS325 crashes USB Stick formatted with ext3  (Read 4277 times)

hait

  • Level 1 Member
  • *
  • Posts: 2
DNS325 crashes USB Stick formatted with ext3
« on: April 01, 2011, 12:18:02 PM »
If you plug in an usb stick with ext3 format (for example to run fonz funplug) the file system on the usb stick will be destroyed. This happens while booting or you plug in the stick while the 325 is running.

I have found the line 864 in the script usbmount which tries to mount a vfat (without success).  If you remove the line everything is ok!

Please correct this in the next firmware!

A file system error occurs also, if the 325 does not find both disks while booting (using RAID0).  At the next boot (with both disks) the Volume_1 is corrupt.
Logged

Wilson

  • Level 1 Member
  • *
  • Posts: 20
Re: DNS325 crashes USB Stick formatted with ext3
« Reply #1 on: May 08, 2011, 08:37:13 PM »
Is this issue only occur on ext3 with the usb stick plugging in when device is booting? I has a usb stick with ext2 and plugging in when the device finished booting, and it can be mounted successfully without any problem.
Logged

hait

  • Level 1 Member
  • *
  • Posts: 2
Re: DNS325 crashes USB Stick formatted with ext3
« Reply #2 on: May 10, 2011, 08:27:39 AM »
I think I have only tried it with ex3 (not with ex2). My USB stick has a size of 8GB.
I did the format with mke2fs -j /dev/sdc1 using funplug
Logged