D-Link Forums

The Graveyard - Products No Longer Supported => IP Cameras => DCS-825L => Topic started by: baleian on July 14, 2015, 01:57:28 PM

Title: Connection Issues with FW 1.06 (06)
Post by: baleian on July 14, 2015, 01:57:28 PM

After updating to the new firmware, my DCS-825L has been periodically disconnecting from our WI-FI. The router is fine, and all other peripherals are working OK, but the camera just disconnects.  Performing a reset of either the cam or router fixes the issue.

Anyone else have this issue since the upgrade?  If so, any fixes or suggestions. 

If not, anyone know where I can get the old version of the FW (the 1.05 FW)?

Cheers,

Title: Re: Connection Issues with FW 1.06 (06)
Post by: francorg on July 14, 2015, 02:04:02 PM

Did you try a factory reset of the cam?

Title: Re: Connection Issues with FW 1.06 (06)
Post by: baleian on July 14, 2015, 02:30:33 PM

Didn't try that.  Can the factory reset be done via the Andriod App?

Title: Re: Connection Issues with FW 1.06 (06)
Post by: rose05 on July 17, 2015, 11:09:03 PM

hi

as far as I know its not possible to reset the camera via app or mydlink access!
only via the reset buttom on the camera self

on the old fw 1.03 it is possible see here
(http://fs1.directupload.net/images/150718/p42kdiwh.jpg)

Title: Re: Connection Issues with FW 1.06 (06)
Post by: rose05 on July 18, 2015, 12:20:14 AM

Quote from: rose05 on July 17, 2015, 11:09:03 PM

hi

as far as I know its not possible to reset the camera via app or mydlink access!
only via the reset buttom on the camera self

on the old fw 1.03 it is possible see here
(http://fs1.directupload.net/images/150718/p42kdiwh.jpg)

maybe this are working for you, test it:

http://ipaddr/eng/admin/tools_default.cgi