• March 28, 2024, 07:25:30 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Pages: [1] 2

Author Topic: DNS-343  (Read 27274 times)

Cowaxoid

  • Level 1 Member
  • *
  • Posts: 2
DNS-343
« on: February 12, 2016, 07:22:36 AM »

Hello!
- HDD configuration is standard (individual disk) of 4 HDDs
- I turned off the DNS-343 and took out one disk
- Put back, DNS-343 does not see the disk and offered to create a raid
Why?
Logged

ivan

  • Level 8 Member
  • ***
  • Posts: 1480
Re: DNS-343
« Reply #1 on: February 12, 2016, 12:22:14 PM »

Quote
turned off the DNS-343 and took out one disk

Why and what did you do with the disk while it was out of the unit?
Logged

Cowaxoid

  • Level 1 Member
  • *
  • Posts: 2
Re: DNS-343
« Reply #2 on: February 14, 2016, 11:48:37 PM »

Why and what did you do with the disk while it was out of the unit?
Nothing. Just pulled out, I reload the DNS-343 and inserted back.
Logged

ivan

  • Level 8 Member
  • ***
  • Posts: 1480
Re: DNS-343
« Reply #3 on: February 15, 2016, 07:18:03 AM »

When you say you 'reload the DNS-343' what do you mean?

I am sorry but I do not understand why you would take a disk out of a working unit for no reason - it just does not make sense.  As for the unit asking to create a RAID disk, it means that the unit no longer considers the disk as formatted and wants to format it as as Standard disk.
Logged

dallen

  • Level 2 Member
  • **
  • Posts: 38
Re: DNS-343
« Reply #4 on: July 10, 2016, 06:14:21 AM »

I think I know the answer and can help you fix it, but before I go into details I want to make sure that you are still in need of assistance.  Do you run Windows or Linux?
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DNS-343
« Reply #5 on: July 10, 2016, 11:44:27 AM »

You could provide the assistance so any future users will benefit from your knowledge. Thank you.

I think I know the answer and can help you fix it, but before I go into details I want to make sure that you are still in need of assistance.  Do you run Windows or Linux?
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

dallen

  • Level 2 Member
  • **
  • Posts: 38
Re: DNS-343
« Reply #6 on: July 27, 2016, 03:57:29 AM »

I am sorry for the delay.  I've been pretty busy with work lately, but I promise I will post what I think is going on and what I think the solution is as soon as I can.  I dealt with a similar issue and, with some assistance from a Linux guru that is a friend of mine, I was able to fix it.  I think you will be surprised how easy the solution is.  Since it has been a while, I need to take a minute to make sure that I fully understand it again in order to explain.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DNS-343
« Reply #7 on: July 27, 2016, 06:33:40 AM »

Please provide the details so users will know how you fixed it.

Thank you.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

dallen

  • Level 2 Member
  • **
  • Posts: 38
Re: DNS-343
« Reply #8 on: July 27, 2016, 10:01:17 AM »

Okay.  I am still trying to reach my Linux guru friend, but here is what I have so far.  I will supplement this thread with any additional information that I learn after speaking with him.

Basically, the solution is fairly simple if you have a Linux machine.  If you do not, then you still may be able to do it, but I do not know how.  When you add or change a drive within the DNS-343 (and presumably the DNS-323) the web GUI interface will always want to format the drives (all of them I think).  This can be circumvented by doing the following:

1)  Mount the drives on a Linux box (either simultaneously or individually it doesn't matter).
When you do you will be presented with two windows (one will be the mounted partition and the contents of the drive and the other will be the system files of the drive (we are interested in working with the latter.  If you are moving an existing drive the files discussed below should already be present, but if you are adding a new drive then you will likely have to add the files.

2)  There are four (4) files of interest: ChkSCSI, dsk_mapping, raidtab, and raidtab2web

3)  I cannot remember which is the one that is critical for modifying to address the issue (when I reach my friend I should find out and will update this thread).  I am going to attach screenshots of how they should all look.

4)  Modifications should be made under terminal using sudo nano [file name], then control-O to write changes, then control-X to exit

5)  You will still be prompted to format the drives by the browser interface for the DNX-343, but if you simply skip passed that your drives should be recognized.

Please let me know if you have any questions or issues and I will try my best to help.







« Last Edit: July 27, 2016, 02:46:00 PM by dallen »
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DNS-343
« Reply #9 on: July 27, 2016, 10:22:31 AM »

Awesome information and details. Thank you for posting this. This will come in handy for future users.

Thank you.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

dallen

  • Level 2 Member
  • **
  • Posts: 38
Re: DNS-343
« Reply #10 on: July 27, 2016, 05:11:53 PM »

I added a step 5 which is critical, but one of my screenshot settings is off which causes the web interface to continuously present the prompt screen identifying a hard drive change and wanting to format.  I think I can fix this with a settings tweak, but I'm not positive.  Let me post back soon.  I wish the subject of this thread could be changed to reflect the problem it addresses for future reference.  Keep in mind that simply skipping past the web interface formatting prompt is all that is required; however, I have addressed this issue and fixed it before.  I just need to remember how.  More to come soon.
« Last Edit: July 28, 2016, 03:01:37 AM by dallen »
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DNS-343
« Reply #11 on: July 27, 2016, 05:17:14 PM »

 ;)
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

dallen

  • Level 2 Member
  • **
  • Posts: 38
Re: DNS-343
« Reply #12 on: July 31, 2016, 06:48:20 AM »

OK. I found this thread which is the thread that originally started me down this path:

forums.dlink.com/index.php?topic=52395.msg197820#msg197820

I think the only way to get the DNS-343 to stop complaining about the drives being changed is to have the fun plug installed so that you can ssh or telnet into the DNS-343 and initiate the command "hd_verify -w".
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DNS-343
« Reply #13 on: July 31, 2016, 11:16:25 AM »

Kewl. All info is good.

Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

ivan

  • Level 8 Member
  • ***
  • Posts: 1480
Re: DNS-343
« Reply #14 on: August 02, 2016, 12:54:09 PM »

Thank you dallen for the information (we have it stored for possible future use).

I often wonder what people are thinking when they 'just take a disk out' of a working NAS, after all they don't do that with their computers (at least I hope not).  Many of the problems we see on these forums stem from people doing things with their NAS boxes that they wouldn't dream of doing with their computers - strange.
Logged
Pages: [1] 2