• March 28, 2024, 03:17:20 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DCS-936L and motion detection - firmware update?  (Read 4099 times)

martinthorhauge

  • Level 1 Member
  • *
  • Posts: 2
DCS-936L and motion detection - firmware update?
« on: July 27, 2017, 10:57:22 AM »

Hi there.

Just bought this camera yesterday and been using several hours adjusting motion detection because i got false alarms a lot of the time. Been reading several threads in this forum about this issue and about beta firmware update. I can see in another thread that the new beta hasn't cured all motion detection issues?
So -  Should i update now or wait?
My currently firmware version is V1.02-2026
Camera is placed so that it does not point towards a window. However, light and sun comes in from side windows and this is seen in the motion detection area of the camera.

Any ideas of how long a range motion detection should work on this camera? Seems like i have to be within 2-3 meters(~8 feet) before it triggers an alarm.

Another minor issue that i have found is when you turn off motion detection in the app and afterwords turn it on again it resets the sensitivity to 30%(default) - This is quite annoying and could have been nice if it stored your setting so that you shouldn't set the value each time you turn on motion detection. Any workaround for this issue?

Regards Martin
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DCS-936L and motion detection - firmware update?
« Reply #1 on: July 27, 2017, 11:12:36 AM »

Link>Welcome!

  • What region are you located?

The beta cures the false detections however for me and others, we no longer get any detections. So up to you if you want to try the beta or now. D-Link is aware of this.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

martinthorhauge

  • Level 1 Member
  • *
  • Posts: 2
Re: DCS-936L and motion detection - firmware update?
« Reply #2 on: July 27, 2017, 12:59:05 PM »

I'm from Europe(Denmark)

I do not seem to win a lot by updating firmware at this time if it just causes another problem.

Do you know if D-link is working on correcting this error in firmware? I would like to keep the camera but not at all costs and still have the opportunity to return it.
Logged

RYAT3

  • Level 10 Member
  • *****
  • Posts: 2254
Re: DCS-936L and motion detection - firmware update?
« Reply #3 on: July 27, 2017, 06:20:01 PM »

I'm from Europe(Denmark)

I do not seem to win a lot by updating firmware at this time if it just causes another problem.

Do you know if D-link is working on correcting this error in firmware? I would like to keep the camera but not at all costs and still have the opportunity to return it.

It's a cheap barebones camera.  If you like the image, keep it and use it to record 24x7 to a microSD card and get a different camera.  Start a collection.  ;)
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DCS-936L and motion detection - firmware update?
« Reply #4 on: July 30, 2017, 12:47:44 PM »

D-Link is aware of the issue.

Please phone contact your regional D-Link support office as well.

I'm from Europe(Denmark)

I do not seem to win a lot by updating firmware at this time if it just causes another problem.

Do you know if D-link is working on correcting this error in firmware? I would like to keep the camera but not at all costs and still have the opportunity to return it.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DCS-936L and motion detection - firmware update?
« Reply #5 on: October 18, 2017, 01:41:41 PM »

Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.