D-Link Forums

The Graveyard - Products No Longer Supported => Routers / COVR => DIR-600L => Topic started by: sauravpunalekar on July 01, 2015, 09:22:36 AM

Title: Port Forward not working :(
Post by: sauravpunalekar on July 01, 2015, 09:22:36 AM
Hello!
I own a D-Link DIR-600 router.
I want to host unturned(video game) server..
When i port forwarded my router previously... it used to work fine
However i suddenly stopped working....
I tried upgrading firmware also tried resetting it to factory settings..
Any help will be appreciated!
Thanks! :D
Title: Re: Port Forward not working :(
Post by: FurryNutz on July 01, 2015, 09:27:21 AM
Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)

  Link> >FW Update Process (http://forums.dlink.com/index.php?topic=42457.0)

Internet Service Provider and Modem Configurations

Router and Wired Configurations
Some things to try: - Log into the routers web page at 192.168.0.1. Use IE, Opera or FF to manage the router. Besure to log into the Admin account on the router.
Title: Re: Port Forward not working :(
Post by: sauravpunalekar on July 01, 2015, 09:32:59 AM
Region: India
Hardware Version: B1
Connection: Wireless
I performed the upgrade(upgraded to version 2.06 and then performed factory reset and set it up from scratch)
ISP: Cable
uPnP: disabled
Many of the settings you mentioned aren't even present
Please Help
Thanks

Title: Re: Port Forward not working :(
Post by: FurryNutz on July 01, 2015, 09:37:05 AM
Is there a cable modem? is so what is the Mfr and model #?
What is the IP address the router is getting from the ISP service? ##.##.###.### or a 192. or 10. oe 172. type address?
Title: Re: Port Forward not working :(
Post by: sauravpunalekar on July 01, 2015, 09:39:37 AM
Model Number: DIR-600L
IP from ISP: 103.250.47.6
Title: Re: Port Forward not working :(
Post by: FurryNutz on July 01, 2015, 09:46:48 AM
The DIR-600L is not a modem, it's a router.
However I think your getting a public IP address. Checking for double NAT condition which would inhibit proper port forwarding from working.

Please post the configuration of your Port Forward settings:
Adding Screenshots In A Post (http://forums.dlink.com/index.php?topic=58120.0)

Please confirm that his is a DIR-600L and not a DIR-600?

I presume if the PF was working at some point and you didn't change anything, then the changes may have been with either the application service or the ISP changed something. You should contact both of them to get help and information regarding this.
Title: Re: Port Forward not working :(
Post by: sauravpunalekar on July 01, 2015, 09:52:25 AM
Yeah i own a router..
I will attach details in a screenshot
it is a DIR 600L
http://prntscr.com/7nlfk5
Title: Re: Port Forward not working :(
Post by: FurryNutz on July 01, 2015, 09:56:59 AM
After setting up the ports you do have the uPnP disabled on the router and have the application running when checking port status?
 Im moving this thread to the DIR-600L forum

What MFr and model is the ISP modem?
Title: Re: Port Forward not working :(
Post by: sauravpunalekar on July 01, 2015, 10:01:18 AM
Yes. I have uPnP disabled.
I check port forwarding through some websites(canyouseeme and some others)
I don;t actually know the mfr and model of ISP modem..
But its the same modem from ages (when port forwarding used to work on my router )
Title: Re: Port Forward not working :(
Post by: FurryNutz on July 01, 2015, 10:09:57 AM
I presume if the PF was working at some point and you didn't change anything, then the changes may have been with either the application service or the ISP changed something. You should contact both of them to get help and information regarding this.
Title: Re: Port Forward not working :(
Post by: sauravpunalekar on July 01, 2015, 10:12:33 AM
Can you use teamviewer to check my settings again please?
As I have no knowledge regarding routers I am a complete amature
Title: Re: Port Forward not working :(
Post by: FurryNutz on July 01, 2015, 10:15:43 AM
The settings look fine and from what you said and posted and confirmed, if this is all the same as before..then something else has changed on the ISP side or application side...
Title: Re: Port Forward not working :(
Post by: sauravpunalekar on July 02, 2015, 08:09:35 AM
Guess i might be having some firewall blocking my connection(But all firewalls are disabled)
When i connect to canyouseeme it says connection refused.
I saw a similar post previously on this forum where you had mentioned something like modifying something in dmz section.
Can you explain more on that?
Title: Re: Port Forward not working :(
Post by: FurryNutz on July 03, 2015, 09:50:03 AM
Please provide the link to this information please...

You can try putting your PC in the DMZ with it's IP address and see...
Title: Re: Port Forward not working :(
Post by: sauravpunalekar on July 05, 2015, 05:10:27 AM
I've tried everything and nothing seems to work
I also tried contacting my ISP who has got no answer as well.
I'll attach screenshots with my configuration
http://imgur.com/h8WBkIP&a9T9E7F&0hyVZVN#0 (http://imgur.com/h8WBkIP&a9T9E7F&0hyVZVN#0)
http://imgur.com/h8WBkIP&a9T9E7F&0hyVZVN#1 (http://imgur.com/h8WBkIP&a9T9E7F&0hyVZVN#1)
http://imgur.com/h8WBkIP&a9T9E7F&0hyVZVN#2 (http://imgur.com/h8WBkIP&a9T9E7F&0hyVZVN#2)
Title: Re: Port Forward not working :(
Post by: PacketTracer on July 05, 2015, 06:26:35 AM
Hi,

if you scroll further down ADVANCED | Firewall & DMS, you will see that your DIR-600L has an IPv4 firewall. Hence for any port forwarding rule you enter you also have to enter corresponding firewall rules. Please disable DMZ and try if the following settings will work:

(http://s25.postimg.org/5mr6jondb/image.png)

You further seem to have a dynamically changing global IP address assigned by your ISP to your router's WAN interface. Hence, you may need some DynDNS solution that registers your current public IP address in DNS to be represented by some static name MYGAMINGSERVER.<some dyndns-domain>, in order to enable Internet access via using MYGAMINGSERVER.<some dyndns-domain>:27010, which resolves to <my-current-WAN-IP-address>:27010.

Btw: According to this (http://unturned.wikia.com/wiki/Hosting_a_Dedicated_Server) the default unturned port is 27015 except you used the -port:27010 option when starting Unturned.exe.

PT
Title: Re: Port Forward not working :(
Post by: FurryNutz on July 07, 2015, 05:03:38 PM
Thank you PT for the additional help on this.  ;D