I HAVE UPDATED TO 1.32EUb01
BUT REMOTACCESS DOESN'T WORK ON THIS VERSION, MADE BY DE-PEOPLE.
I COME TO A BLANK SIDE AND CAN READ:"Not Found" SEEMS THAT I'M CONNECTED
BUT NO FURTHER ACTION. SAME ON HTTP(S) DIRECT OR VIA DYNDNS.
Same behavior when your session have timed out, you get "not found" Doesn't work if you try to connecting with root address.
HTTP(S) WORKS FROM WIRELESS AND LAN-SIDE. You can direct downgrade from 1.32EUb01 to 1.31EUb02, that is possitive.
I HAVE'T TESTED UPNP SO I DONT KNOW IF IT WORKS, BUT IT'S REPORTED NOT WORKING IN FORUMS:
DIR-655A4 release notes.
========================
http://www.d-link.de/cs/Satellite?c=Product_C&childpagename=DLinkEurope-DE%2FDLTechProduct&cid=1197319392719&p=1197318958220&packedargs=QuickLinksParentID%3D1197318958220%26locale%3D1195806663795&pagename=DLinkEurope-DE%2FDLWrapper
V1.32EUb01, 2010/02/10
1. DWM-152/156 v1.04 new driver support. The FCS version of the 3G Adapters
2. 404 webpage feature. When no valid Internet link is detected a slightly
more helpful page in English is displayed by the router. DOESN'T WORK !
3. 12/24-hours support. Clock format to overcome previous limitations.
4. HNAP security issue fixed.
This the official release version for product.
I HAVE REALY GOOD PATIENCE BUT THIS BEHAVIOR REPETED TIME AFTER TIME.
RGS
KTHADDOCK
I HAVE UPDATED TO 1.34EUb05 I HAVE TESTED THIS ALOT "
DON'T USE THIS SH*IT !!!!"
Seems that programmers Matt and Jerry CAN'T program. If you look back on erlier versions that doesen't work they are involved. 1.31EUb02 from France is very good and working !. Give France programmers possibility to save d-links arse.
Remote management doesn’t work
1.34EUb05 from hereFrom LAN-side and wi-fi http and https work.
From WAN side only http working and https reporting “NotFound”
When you try to save setting on Administrator Settings you have to write your admin password again.
Functions on that side need to be debugged, I’t happend strange things wich I don’t couldent test.
When you enable HTTPS and try to connect from WAN side you get error message:
wrongkod: ssl_error_rx_record_too_longTraffic Statistics seem to doesen't work.
LAN Statistics=>seems to work ! WAN Statisticsand
Wireless Statistics=>seems to work ! only show sent and recived, nothing else.
When you have reboted dir-655 the you don't have webaccess anymore, have to login through 192.168.0.1 and after that you can access http !
This Firmware tok my ISP-network down today and my other services behind my switch died.THIS FIRMWARE IS A DISASTER, I HAVE NEVER GOT A FW WOH TAKE ISP DOWN !!!
I haven’t tested UpnP so I don’t know it’s working.
ver1.34EUb05Beta, 2010/07/12,
Matt1. Ubicom SDK 7.6.1 build 179, 2010, Jul 12, UBICOM_7_6_1_B0179
2. Checksum: 0x0434D3D9
Problems Resolved:
1. Fix the Remote Management function doesn't work.
“ SEEMS TO BE A BIG PROBLEM”ver1.34EUb04Beta, 2010/07/05,
Jerry1. Ubicom SDK 7.6.1 build 177, 2010, Jun 22, UBICOM_7_6_1_B0177
2. Checksum: 0x0434FFD2
Problems Resolved:
1. Fix the Remote Management function doesn't work.
“ SEEMS TO BE A BIG PROBLEM”
RGS
KTHADDOCK