• March 28, 2024, 02:43:07 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Pages: [1] 2 3

Author Topic: Firmware v1.22 Beta 02 Feedback  (Read 39386 times)

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Firmware v1.22 Beta 02 Feedback
« on: January 15, 2010, 11:09:38 PM »

So got a new build and for me on an A1 HW using Gaming and Game fuel rules and Wireless is set for N mode only at 2.4Ghz, I've been enjoying some good stable connections on my Xbox and MacBook Pro. No disconnects. House network system has been good too.

LAN STATISTICS

Sent :1313481
TX Packets Dropped :0
Collisions :0
Received :2748885
RX Packets Dropped :0
Errors :0
WAN STATISTICS

Sent :598051
TX Packets Dropped :0
Collisions :0
Received :5796294
RX Packets Dropped :0
Errors :0
WIRELESS STATISTICS

Sent :40193
TX Packets Dropped :369
Received :43576
RX Packets Dropped :164
Errors :36

I'm in about 15-20 feet away from the router in my office behind a closed door. I do like the low Packets Dropped and Error rates. 5Ghz is worse however been told using 5Ghz should be use in line of sight with out any obstructions so walls and doors will have more of an adverse affect while using 5Ghz.  :-\ So i'm hanging with 2.4Ghz for now. So far, v1.22 seems very stable for me. Been up since last night. Played xbox for a couple of hours with out seeing any issues accept for one game with others that seem to be introducing lag.  >:(Other then that, I'm happy.  ;D

Any one else???? Let us know.  ;)
« Last Edit: January 15, 2010, 11:11:56 PM by FurryNutz »
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

Toasty

  • Level 1 Member
  • *
  • Posts: 15
Re: Firmware v1.22 Beta 02 Feedback
« Reply #1 on: January 16, 2010, 11:29:24 AM »

That's good to hear, i'm running 1.16 currently and have been reluctant to jump to the 1.2x series for fear of having all kinds of problems and not having the option to go back after seeing all of the posts recently about 1.21+ problems.

My current wireless config is the same, so i'm interested in seeing if your setup remains stable before I make the jump.  :)

I want to get your professional ;) opinion, should I make the jump, or stick w/ 1.16 beta?
Logged
Verizon FIOS > DGL-4500 A1 1.22NA Beta 03 5GHz N Only > Netgear Prosafe GS108 Switch > Buffalo WHR-HP-G54 Tomato 1.18 B/G AP

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Firmware v1.22 Beta 02 Feedback
« Reply #2 on: January 16, 2010, 11:42:01 AM »

My professional optinion would be that if your router is working well in all areas. I would keep it like that. Your not missing out on much of anything. I've always tired to keep that rule if possible. However if you think you like to make the jump then sure, go for it. Yes you can't go back to prior 1.2x once your up. Been very happy with 1.22 and seems a lot more stable. 5Ghz still needs some work and boost. Getting a lot of errors and dropped packets if i'm more than 10 feet away from the router. 5Ghz is short band waves and any obstructions like walls and doors have an effect on the signal from what I've been told. Better for line of site kinda thing. Im enjoying sitting here in the living room on my MacBook Pro on N mode only at 2.4Ghz.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

Toasty

  • Level 1 Member
  • *
  • Posts: 15
Re: Firmware v1.22 Beta 02 Feedback
« Reply #3 on: January 16, 2010, 01:13:05 PM »

Yeah, I had an uptime of somewhere around 120 days on 1.16 beta since I last rebooted the router, until I turned the wireless on 2 days ago.

I have a Buffalo router running "Tomato" firmware that's acting as just an AP, but it only supports B/G wireless.

I want to use the N only mode on the DGL-4500 but the last time I tried it on 1.16 beta, it didn't seem to be too much of an improvement streaming 1080p mkv video from an internal home server that's connected via gigabit ethernet to the 4500 and being viewed on three N-capable notebooks, so I turned it back off and continued using the buffalo AP.

Did you notice an improvement in N speeds from 1.1x to 1.2x?

Thanks for all the help, it's very much appreciated.  :)
Logged
Verizon FIOS > DGL-4500 A1 1.22NA Beta 03 5GHz N Only > Netgear Prosafe GS108 Switch > Buffalo WHR-HP-G54 Tomato 1.18 B/G AP

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Firmware v1.22 Beta 02 Feedback
« Reply #4 on: January 16, 2010, 03:45:58 PM »

You might ask others on here if they've seen any speeds improvements going from 1.1x to 1.2x. I didn't start using the Wireless on the 4500 until i got my MacBook Pro for my birthday. I had been using a Apple Airport to hand my b/g devices so I had the 4500 Wifi shut off and FW was already at 1.21 by the time I figured out that my MBP had N capabilities. Sorry I can't off more info. Working on N only at 2.4Ghz seems really good. I think they could possibly up the range a bit more and do hope they can and possibly get the 5Ghz working better too. The speed on the 2.4Ghz is pretty good. I'm currently running 2.4Ghz N mode only. Seems really good and stable. I can transfer a 240Mb file from my wired file server in my office to my LT sitting here in the living room. Taking about 2-3mins. Seeing 1-3Mb transfer speeds. Using 5Ghz I was seeing speeds up to 7Mbs. But there were more dropped packets and errors. I was in the bedroom next to the office when I was doing this, with in 8ft. If I was in the living room, 15-20 ft away from the router, the speeds dropped and sometimes the transfer would not complete.

I think also streaming heavy 1080p video streams is not going to be perfect. Wireless is really at the stage, IMO, to handle large data or bandwidth right now. It's hard enough making sure that XBL users work well over WiFi connections giving the data, voice that needs processing. LOL. Hope someday WiFi will be robust enough to handle most anything.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

Toasty

  • Level 1 Member
  • *
  • Posts: 15
Re: Firmware v1.22 Beta 02 Feedback
« Reply #5 on: January 16, 2010, 04:12:42 PM »

Yeah, the 1080p video works, its just that there might be a tiny albeit annoying hiccup in playback once every minute or two for less than a quarter of a second, but it's still enough where it's annoying.

I'm hoping with tweaking, I can get it stable w/o any interruptions.

The stream itself only takes about 25MB/sec max, so it's not the bandwidth, it's the stability of the connection itself.

The following are the stats I got w/ N Only, WISH enabled, doing a little web surfing and streaming a few videos for half an hour last night on 1.16 beta.

LAN Statistics
Sent : 1414837
TX Packets Dropped : 10
Collisions : 0    
Received : 3449746
RX Packets Dropped : 0
Errors : 0

WAN Statistics
Sent : 433375
TX Packets Dropped : 0
Collisions : 0    
Received : 534153
RX Packets Dropped : 0
Errors : 0

Wireless Statistics
Sent : 3201465
TX Packets Dropped : 1678    
Received : 979954
RX Packets Dropped : 1528
Errors : 75

I think i'll give 1.22 a shot later this weekend or next.

Yeah, XBL users' connections really stink as is, I have my 360 hooked up wired, same w/ my gaming PC and PS3.

Thanks again for the info!
« Last Edit: January 16, 2010, 04:19:05 PM by Toasty »
Logged
Verizon FIOS > DGL-4500 A1 1.22NA Beta 03 5GHz N Only > Netgear Prosafe GS108 Switch > Buffalo WHR-HP-G54 Tomato 1.18 B/G AP

deezomaxima

  • Level 2 Member
  • **
  • Posts: 27
Re: Firmware v1.22 Beta 02 Feedback
« Reply #6 on: January 16, 2010, 04:40:44 PM »

Furry, over how many days did you use the new beta before reporting here? If the dropped packets have been reduced, I'm going to upgrade tonight.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Firmware v1.22 Beta 02 Feedback
« Reply #7 on: January 16, 2010, 04:46:03 PM »

Firmware Version :1.22NA,  2009/12/23
Connection Up Time :2 Day 0 Hour 11 Min 01 Sec

WIRELESS STATISTICS

Sent :5253
TX Packets Dropped :32
Received :4234
RX Packets Dropped :397
Errors :0
« Last Edit: January 16, 2010, 04:54:19 PM by FurryNutz »
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

deezomaxima

  • Level 2 Member
  • **
  • Posts: 27
Re: Firmware v1.22 Beta 02 Feedback
« Reply #8 on: January 16, 2010, 04:54:35 PM »

oh duh! thanks.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Firmware v1.22 Beta 02 Feedback
« Reply #9 on: January 16, 2010, 04:55:38 PM »

let us know how it works out for you.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

Reinvented

  • Level 4 Member
  • ****
  • Posts: 437
Re: Firmware v1.22 Beta 02 Feedback
« Reply #10 on: January 17, 2010, 02:23:43 PM »

I can't say I can agree with this, with all the frustration I went and bought a netgear WNDR3700 router. I'm connected on wireless N 5Ghz and running no problems through 7 walls in the house from where the router is and the location of my notebook.

I would have to say something is still not right with the wireless unless you have huge interference in your area.

On the DLink routers, 5 GHz seems to work best with LoS and outdoors.  Not so much for indoors for some reason.  My guess it's just the radio.  I've had the 4500 for over a couple of years now, and it's never been stable on 5 GHz no matter how close or far I've been from the router.

As far as the FW goes, I've always done my normal battery of testing on it.  I flashed it about 21 hours ago, and it seems to be stable.  No reboots yet, and wireless seems MUCH more stable.  I've yet to do some full transfers of 2GB+ from wired Gb to my Wireless N MBP.

It does seem more responsive for sure, and DNS relay seems to be working as intended.  However, I am still having some problems with UPnP, and noticing a decrease in speed on the upload portion.  

Update:  I thought I'd try to run some of the GameFuel settings, as I took them off previously due to router load perhaps, which caused crashing.  I set up the rules as normal, however I had a problem where after inputting 1 rule, and clicking reboot later, and starting to setup another rule and hitting save would kick me out to the login screen.  Can this get looked at? 

I also noticed that after about 5 minutes of inactivity, it will kick you as well.  There used to be an option where you could specify the idle timeout, which brought you back to the login as well.  It seems to have disappeared.  Any reason as to why?
« Last Edit: January 17, 2010, 03:38:43 PM by Reinvented »
Logged

Corroded

  • Level 2 Member
  • **
  • Posts: 49
Re: Firmware v1.22 Beta 02 Feedback
« Reply #11 on: January 17, 2010, 09:42:25 PM »

OK... I was pointed here about this latest fw load.  I still do not see a list of "fixes" from Dlink.
Logged

Dalmo

  • Level 2 Member
  • **
  • Posts: 33
Re: Firmware v1.22 Beta 02 Feedback
« Reply #12 on: January 18, 2010, 08:40:30 AM »

so is this new beta working or not???


please post results


I'm back to my old Router wont go back to the 4500
till all problems are fixed



thank you



Dalmo
« Last Edit: January 20, 2010, 09:14:16 PM by Dalmo »
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Firmware v1.22 Beta 02 Feedback
« Reply #13 on: January 18, 2010, 09:27:22 AM »

What currently loaded on your 4500 now?
Been pretty happy with v1.22 so far on my A1 HW.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

Toasty

  • Level 1 Member
  • *
  • Posts: 15
Re: Firmware v1.22 Beta 02 Feedback
« Reply #14 on: January 18, 2010, 10:18:05 AM »

I started having problems w/ Wireless N on FW 1.16 beta on A1 hardware, clients would drop out and would reconnect in about 1 minute. This happened on both 2.4 and 5GHz.

I upgraded to 1.22 B02 last night, and so far so good, and the lack of lost packets/errors is really amazing!  ;D

I'm using 5GHz WPA2 only w/ AES, Gamefuel on, WISH and WiFi Protected Setup off.

Firmware Version :  1.22NA,  2009/12/23 
Connection Up Time :  0 Day 10 Hour 41 Min 07 Sec 

LAN Statistics
Sent :2896416
TX Packets Dropped :3
Collisions :0
Received :5764664
RX Packets Dropped :0
Errors :0

WAN Statistics
Sent :104097
TX Packets Dropped :0
Collisions :0
Received :189754
RX Packets Dropped :0
Errors :0

Wireless Statistics
Sent :5910459
TX Packets Dropped :361   
Received :2948388
RX Packets Dropped :0
Errors :0

I really haven't stressed it with gaming/downloading/wireless yet, but I should know by today or tomorrow evening if this build is stable. If I run into any problems, i'll let you guys know. :)
« Last Edit: January 18, 2010, 10:22:32 AM by Toasty »
Logged
Verizon FIOS > DGL-4500 A1 1.22NA Beta 03 5GHz N Only > Netgear Prosafe GS108 Switch > Buffalo WHR-HP-G54 Tomato 1.18 B/G AP
Pages: [1] 2 3