• March 28, 2024, 07:46:56 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Pages: 1 [2]

Author Topic: Firmware Version : v2.10NA  (Read 36250 times)

PDAkiller

  • Level 1 Member
  • *
  • Posts: 23
Re: Firmware Version : v2.10NA
« Reply #15 on: December 12, 2012, 01:58:24 PM »

The uploaded firmware file may not be correct. You may have uploaded a file that is not intended for this Gateway, or the uploaded file may be corrupted.

If the uploaded file is correct, it is possible that the gateway may be too busy to properly receive it right now. In this case, please try the upload again. It is also possible that you are logged in as a "user" instead of an "admin" - only administrators can upload new firmware.

The Gateway will not be reprogrammed.

 Product Page: DIR-655    Hardware Version: B1      Firmware Version: 2.06    

Simple Question: WHY?
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Firmware Version : v2.10NA
« Reply #16 on: December 12, 2012, 02:06:10 PM »

What browser are you using?
Try Opera or FF? If IE 8 or 9, set compatibility mode and test again. Don't use Chrome.
Was the .bin file unpacked from the .zip file that was downloaded?
What current version of FW is loaded?
What region are you located?
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

PDAkiller

  • Level 1 Member
  • *
  • Posts: 23
Re: Firmware Version : v2.10NA
« Reply #17 on: December 12, 2012, 02:22:49 PM »

Firefox latest...
actually: 2.06 EU and it is working with a lot of "bad" messages (upnp and port forwarding) doesn't work well...
like: mroute: pending queue full, dropping entries.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Firmware Version : v2.10NA
« Reply #18 on: December 12, 2012, 02:28:42 PM »

I would go back one prior version and test.

FYI, v2.10NA is only for NA units.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Firmware Version : v2.10NA
« Reply #19 on: December 12, 2012, 02:48:59 PM »

I would use what is officially released for your region on the regional DLink web site. Lasted official version for EU units listed ont the UK site is v2.05.

Any DIR-6 series model does not or every will support 5Ghz radios. Only the 8 series do.

I recommend using official or what is posted on the web.

The v2.10NA version for the NA region is ok, however we've found a bug in it and we don't recommend using it for NA units. GZ is broke.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Firmware Version : v2.10NA
« Reply #20 on: December 12, 2012, 02:59:31 PM »

Yep. Can't use Rev A FW on Rev B routers and vs versa.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

PDAkiller

  • Level 1 Member
  • *
  • Posts: 23
Re: Firmware Version : v2.10NA
« Reply #21 on: December 12, 2012, 03:29:26 PM »

Is there any option to create an EU version from this NA???
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Firmware Version : v2.10NA
« Reply #22 on: December 12, 2012, 03:47:36 PM »

No there isnt
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

Mikeby

  • Level 1 Member
  • *
  • Posts: 6
Re: Firmware Version : v2.10NA
« Reply #23 on: March 23, 2013, 02:36:05 AM »

I would use what is officially released for your region on the regional DLink web site. Lasted official version for EU units listed ont the UK site is v2.05.

Any DIR-6 series model does not or every will support 5Ghz radios. Only the 8 series do.

I recommend using official or what is posted on the web.

The v2.10NA version for the NA region is ok, however we've found a bug in it and we don't recommend using it for NA units. GZ is broke.

What was the bug, and what do you mean by GZ ?

Is this firmware only for rev B or will it work on Rev A as well?  Have rev A2 here, and running release 1.11
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Firmware Version : v2.10NA
« Reply #24 on: March 23, 2013, 09:31:40 AM »

What was the bug, and what do you mean by GZ ?
http://forums.dlink.com/index.php?topic=51224.0

"Is this firmware only for rev B or will it work on Rev A as well?  Have rev A2 here, and running release 1.11"
Rev A HW can only use Rev A FW, and same goes for Rev B HW, only runs Rev B FW.
« Last Edit: September 01, 2013, 10:12:36 AM by FurryNutz »
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.
Pages: 1 [2]