D-Link Forums
D-Link Wireless Adapters => DWA-182 => Topic started by: chalky on June 11, 2014, 08:14:35 AM
-
Howdy all I live in Australia and purchased the DWA-182 adapter revision C1 which is supposed to support USB 3.0 well mine only supports USB 2.0 so I took the casing off and it says revision A on the circuit board, I have just finished speaking with tech support and will be sent out the correct one.
So basically it was revision A inside the revision C1 casing, nothing wrong with laptop all other USB 3.0 devices run as normal.
Win Pro 8.1 Asus laptop double check your device.
Regards
Shane
-
Welcome.
Thanks for sharing your information. Hope the new one works well. Enjoy. ;)
-
Thanks just have to wait for it to be sent out :)
-
just spoke to d-link Australia support there testing the adapter to try to replicate the problem as the rev A1 printed on the PCB itself is not relevant. My dwa-182 C1 should be running at USB 3.0 NOT 2.0 support guy thinks its a driver issue.
-
Awesome, thanks for keeping us posted…hope it all turns out well.
-
Did you get anywhere? Im having the same issue
-
http://forums.dlink.com/index.php?topic=62959.0 (http://forums.dlink.com/index.php?topic=62959.0)
Did you get anywhere? Im having the same issue
-
Thanks for the information. It seems that there isn't an issue as the D-Link OEM drivers do work:
http://forums.dlink.com/index.php?topic=62959.0 (http://forums.dlink.com/index.php?topic=62959.0)
at least for this user.
What region are you located?
-
Ok, seems that your region has some problematic drivers. You can try the ones for USA as the one user said it fixed his issue with 3.0.