• August 15, 2022, 03:20:14 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Firmware 2.02 official release today!  (Read 6515 times)

ECF

  • Administrator
  • Level 11 Member
  • *
  • Posts: 2692
Firmware 2.02 official release today!
« on: November 23, 2011, 05:23:37 PM »

Just wanted to post that the 2.02 official release has been released today and posted at dlink.com.

ftp://ftp.dlink.com//Multimedia/dns320/Firmware/dns320_FW_202
Logged
Never forget that only dead fish swim with the stream

Oops

  • Level 1 Member
  • *
  • Posts: 17
Re: Firmware 2.02 official release today!
« Reply #1 on: November 23, 2011, 05:44:47 PM »

Thank you but this is the same with 2.02 beta binary file exactly.

What is the different between beta and this official ver.?
« Last Edit: November 23, 2011, 05:48:22 PM by Oops »
Logged

albert

  • Level 5 Member
  • *****
  • Posts: 510
    • SoHo NAS Forum
Re: Firmware 2.02 official release today!
« Reply #2 on: November 23, 2011, 06:08:02 PM »

Basically no difference whatsoever, D-Link simply rename it to 2.02. A complete letdown IMO.
Logged
D-Link DNS-320 rev A1 (FW: 2.05) [FFP-0.7]
PCI NAS-01G (FW: Encore ENNHD-1000 4.10)
PCI NAS-01G (FW: OpenNAS 1.9]

rjarl

  • Level 1 Member
  • *
  • Posts: 8
Re: Firmware 2.02 official release today!
« Reply #3 on: November 24, 2011, 12:52:31 AM »

Can I go from 2.02 to 2.00 if I have any issue with the new firmware version?

Thanks!
rjarl
Logged

albert

  • Level 5 Member
  • *****
  • Posts: 510
    • SoHo NAS Forum
Re: Firmware 2.02 official release today!
« Reply #4 on: November 24, 2011, 05:06:55 AM »

Can I go from 2.02 to 2.00 if I have any issue with the new firmware version?

Thanks!
rjarl

No, this version doesn't allow downgrading.
Logged
D-Link DNS-320 rev A1 (FW: 2.05) [FFP-0.7]
PCI NAS-01G (FW: Encore ENNHD-1000 4.10)
PCI NAS-01G (FW: OpenNAS 1.9]

BiNaiRiX

  • Level 1 Member
  • *
  • Posts: 12
Re: Firmware 2.02 official release today!
« Reply #5 on: November 24, 2011, 06:36:06 AM »

And again D-Link missed the MOST IMPORTANT REQUEST FROM THEIR USERS>>>>> Going back to when i all worked FINE
Logged

Oops

  • Level 1 Member
  • *
  • Posts: 17
Re: Firmware 2.02 official release today!
« Reply #6 on: November 24, 2011, 07:13:43 AM »

I saw ECF's posting at http://forums.dlink.com/index.php?topic=42650.0.

He said "The official version will be released before Christmas" (not exactly).

But it's deleted and 2.02 beta turned into the official binary..

Maybe we have to wait until late December.
Logged

rotoman

  • Level 1 Member
  • *
  • Posts: 8
Re: Firmware 2.02 official release today!
« Reply #7 on: November 24, 2011, 12:55:26 PM »

Accessing NAS over DynDNS hostname:

400 Bad Request
Cross Site Action detected!


This function was the one of those some, that were operational in firmware 2.00. I did not change anything since operational status. Port forward in router, hostname, etc are just fine! All I changed is firmware update which supposed to fix some issues, and finally I got even more of them

Congratulation. Are you kidding guys? Releasing the same firmware 2.02 third time. Even the date remain the old one: 23/09/2011. I'm still unable to access device over internet. This is just ridiculous

This is a total and utter disgrace!
Logged

Keithdib

  • Level 1 Member
  • *
  • Posts: 12
Re: Firmware 2.02 official release today!
« Reply #8 on: November 24, 2011, 10:21:44 PM »

I have been using DynDns for about a year, 3 different firmwares and even 2.0.1 with no problems, accessing it from both on site and off site
Logged

colinkhalid

  • Level 1 Member
  • *
  • Posts: 13
Re: Firmware 2.02 official release today!
« Reply #9 on: November 25, 2011, 03:54:01 AM »

I also use dyndns and can access the DNS 320 over the Internet. Port forwarding or other network issues are more likely to be the cause of no access over Internet, not the unit itself
Logged

Keithdib

  • Level 1 Member
  • *
  • Posts: 12
Re: Firmware 2.02 official release today!
« Reply #10 on: November 26, 2011, 12:23:22 AM »

Problems with DynDns and port forwarding are down to router not the NAS
Logged

rotoman

  • Level 1 Member
  • *
  • Posts: 8
Re: Firmware 2.02 official release today!
« Reply #11 on: November 28, 2011, 02:18:12 AM »

Guys,

I have other devices (IPCamera, Router itself, Voip phone adapter and printserver) configured with DynDNS access over the internet. Dont think I can not configure it. The link works fine, I can see login page, but after typing password, I get "cross site action detected" error. This is not router error - this is a NAS admin gui error. Router is responsible for redirecting the port to local port 80, and this function is working fine

Rgs
Logged