• March 28, 2024, 04:06:06 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Pages: [1] 2

Author Topic: New - DCS-960L - Firmware Version v1.04 B02 - Comments & Observations  (Read 18487 times)

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting

Firmware:   v1.04 B02   01/11/2017   NA Region!
Revision Info:
Problems Fixed:
1. HTTPS certification - modified certification from SHA-1 to SHA256.
2. HTTPS certification - generate new https certification after doing factory reset.
3. Web Server - implement Authentication only by basic or digest.
4. Webpage - ActiveX - Sign ocx with with SHA2 and cab with SHA1.
5. Webpage - ActiveX - improved ActiveX for IE disconnect issue.
6. Webpage - SD Management - modify the sort order of the sd card file list (newest file first).
7. Webpage - Advanced - modified Camera Name format to 0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz_-| for bonjour hostname not work issue.
8. Webpage - FTP - add Login Type option.
9. Webpage - Motion Wizard - only motion trigger for Motion Wizard on event setting page.
10. Webpage - factory reset wait time - modified factory reset wait time from 90 secs to 120 secs.
11. HTTPS certification - using MAC address for random seed to generate private / public key.
12. Motion Detection - improving sensitivity of Motion Detection.
13. Webpage - Plug-in - Using Flash player on Non-IE brewers.
14. Video – fix night mode behavior not correct when device restart at low lux environment
15. Webpage - ActiveX - fixed ActiveX control installed issue.
16. LED - fix DUT LED would solid red after reboot DUT in static IP.
17. FTP - fix FTP upload failed issue when ftp account don't need password.
18. Video - used SDK V7.6.1 and add ispcfg bin files for 50/60Hz and 140/120 AE target.
19. Video - dynamic update 50/60 flicker and 140/120 AE target by ispcfg.
20. Audio - changed audio PCM from stereo to mono.
21. Restore Config Files - fix restoring configure values may incorrect issue when configure values using special character '$'.
22. System time - modified system time default to 2016.0307.000000.

New Features:
1. mydlink agent - upgrade to version 2.1.0-b46
2. Support UID feature.

D-Link posted DCS-960L Rev A firmware which can be downloaded here: DCS-960L.

NOTE: Be sure that your wireless signal on the main host router is good and signal is strong with the camera if it's connected wirelessly before upgrading FW.

Please post your comments and observations as a reply to this thread.

 :)  ;)  :)
« Last Edit: April 06, 2017, 06:48:59 AM by FurryNutz »
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

Caracturus

  • Level 1 Member
  • *
  • Posts: 1
Re: New - DCS-960L - Firmware Version v1.04 B02 - Comments & Observations
« Reply #1 on: January 12, 2017, 04:25:46 PM »

Hello. I have tried through both the iOS apps and through the web interface to update the firmware. In all cases, the update is failing. Any suggestions? Thanks.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: New - DCS-960L - Firmware Version v1.04 B02 - Comments & Observations
« Reply #2 on: January 13, 2017, 02:15:32 PM »

What browser are you using? Use IE11 or FF with the cameras UI to update the FW. Be sure to disable any pc security software temporarily while doing the update.

Hello. I have tried through both the iOS apps and through the web interface to update the firmware. In all cases, the update is failing. Any suggestions? Thanks.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

happyhere

  • Level 3 Member
  • ***
  • Posts: 178
Re: New - DCS-960L - Firmware Version v1.04 B02 - Comments & Observations
« Reply #3 on: February 03, 2017, 06:06:49 PM »

I also have the same issue.   Mydlink lite app says new firmware is available, so I click upgrade, then after few minutes it fails.  I tried it like 5x already and not working.  960L is just 1-meter from router, I though of using LAN cable but there is no Ethernet port.

when the firmware upgrade fails, need to physically remove power for restart and is fine again. current firmware is 1.03
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: New - DCS-960L - Firmware Version v1.04 B02 - Comments & Observations
« Reply #4 on: February 03, 2017, 06:09:08 PM »

What browser are you using?
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

happyhere

  • Level 3 Member
  • ***
  • Posts: 178
Re: New - DCS-960L - Firmware Version v1.04 B02 - Comments & Observations
« Reply #5 on: February 04, 2017, 05:00:55 AM »

What browser are you using?

No browser, just the iOS app - Mydlink Lite
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: New - DCS-960L - Firmware Version v1.04 B02 - Comments & Observations
« Reply #6 on: February 04, 2017, 12:01:03 PM »

Can you use FF browser to see if the FW will update?
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

happyhere

  • Level 3 Member
  • ***
  • Posts: 178
Re: New - DCS-960L - Firmware Version v1.04 B02 - Comments & Observations
« Reply #7 on: February 04, 2017, 10:58:06 PM »

Can you use FF browser to see if the FW will update?

I usually use FF browser if camera is plugged to Router's LAN port.  Else, I use mydlink lite app for firmware upgrade (wireless).
I am reluctant on FF then doing wireless as sometimes the pc might disconnect suddenly.

Any documentation that IP camera without LAN port will copy/download first before doing the firmware update?
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: New - DCS-960L - Firmware Version v1.04 B02 - Comments & Observations
« Reply #8 on: February 05, 2017, 12:54:18 PM »

I would use IE11.

I believe the cameras are set up to copy the FW file to the camera first before anything else happens. I would just ensure that your wireless signal is good between the camera and the wifi AP. You might turn OFF all other wifi devices temporarily while the camera is going a FW update.

Be sure all PC security software is temporarily disabled as well.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: New - DCS-960L - Firmware Version v1.04 B02 - Comments & Observations
« Reply #9 on: March 01, 2017, 11:35:49 AM »

Anyone notice that if you use a static IP address ON the camera instead of Auto or Dynamic DHCP on the camera, that after the camera is fully setup and working locally and remotely with mydlink lite app, that if you use a wireless device and scan for near by wireless SSID names that the cameras default SSID set up name is being broadcast? Does changing back to Dynamic or Auto Obtain IP addressing ON the camera, does the default wireless SSID name disappear from the mobile wifi scan list?
« Last Edit: March 01, 2017, 12:21:44 PM by FurryNutz »
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

RYAT3

  • Level 10 Member
  • *****
  • Posts: 2254
Re: New - DCS-960L - Firmware Version v1.04 B02 - Comments & Observations
« Reply #10 on: March 01, 2017, 05:07:21 PM »

I'm still on original F/Ws and only see the WiFi on the camera when it's disconnected.  The one next to me disconnected 3 times and I tried to find it on WiFi analyzer but was not able to.

I think there is a post or 2 around here about people being connected and still seeing the WiFi broadcasting.

---
I was only able to find this.  But it this is normal behavior when it is disconnected, to broadcast WiFi address to look to be setup.

http://forums.dlink.com/index.php?topic=65659.0

---

The app isn't showing it or must not be naming it ( "DCS-960L-xxxx").  But my laptop was showing it full strength, I tried to connect but was unable to.
« Last Edit: March 01, 2017, 05:28:13 PM by RYAT3 »
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: New - DCS-960L - Firmware Version v1.04 B02 - Comments & Observations
« Reply #11 on: March 01, 2017, 06:15:27 PM »

Ok so I changed the 960L back to Dynamic and I don't see it's default SSID anymore. I presume there is something going on with static vs dynamic. I'll pass this on to D-Link for review.

I'm having troubles betting the 936L to set up correctly. May have to send it back.  >:(
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

RNDACS

  • Level 1 Member
  • *
  • Posts: 1
Re: New - DCS-960L - Firmware Version v1.04 B02 - Comments & Observations
« Reply #12 on: March 05, 2017, 05:01:51 PM »

I regret hitting the upgrade link on my IOS app. I got upgrade failed and camera stopped working. Have had camera for almost a year and upgrades have not been fun but I got it done. Not this time. It downloaded fine but failed at install. When all failed, I've always been able to do a factory reset and try again. Not this time. New red and green status lights started flashing and it never allow me to do anything. 3 hours of messing with it and no different then what I started. Wireless router is 10 ft from camera in 5 by 5 signal. How do I recover when it won't reset? HELP!!
« Last Edit: March 05, 2017, 05:32:07 PM by RNDACS »
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: New - DCS-960L - Firmware Version v1.04 B02 - Comments & Observations
« Reply #13 on: March 06, 2017, 06:40:59 AM »

Link>Welcome!

  • What Hardware version is your DCS? Look at the sticker behind or under the camera.
  • Link>What Firmware version is currently loaded? Found on the DCSs web page under status.
  • What region are you located?

What Mfr and model is the main host router?
What wireless modes are you using?
I recommend setting a static IP address ON the cameras outside of the main host routers default DHCP IP address pool as a troubleshooting step: 192.168.#.10 and .11  DHCP

I don't know if there is any recovery for cameras with out a LAN connection. I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.
Let us know how it goes please.



I regret hitting the upgrade link on my IOS app. I got upgrade failed and camera stopped working. Have had camera for almost a year and upgrades have not been fun but I got it done. Not this time. It downloaded fine but failed at install. When all failed, I've always been able to do a factory reset and try again. Not this time. New red and green status lights started flashing and it never allow me to do anything. 3 hours of messing with it and no different then what I started. Wireless router is 10 ft from camera in 5 by 5 signal. How do I recover when it won't reset? HELP!!
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

happyhere

  • Level 3 Member
  • ***
  • Posts: 178
Re: New - DCS-960L - Firmware Version v1.04 B02 - Comments & Observations
« Reply #14 on: April 16, 2017, 06:54:30 AM »

Ok so I changed the 960L back to Dynamic and I don't see it's default SSID anymore. I presume there is something going on with static vs dynamic. I'll pass this on to D-Link for review.

I'm having troubles betting the 936L to set up correctly. May have to send it back.  >:(

Furry, maybe dlink can add some option disable the direct wifi mode after completing setup  :)
http://forums.dlink.com/index.php?topic=66260.0

Dlink team have done it before in 5020L where they removed the direct mode
http://d2okd4tdjucp2n.cloudfront.net/DCS-5020L/DCS-5020L_Ax_Release_Notes_for_FW_v1.14.09.pdf
a. Remove the Direct Mode function.  <--- on 5020L  1.12 firmware


Logged
Pages: [1] 2