D-Link Forums
The Graveyard - Products No Longer Supported => D-Link Storage => DNS-323 => Topic started by: Medic911 on December 01, 2008, 03:55:54 PM
-
Sorry I feel this is like beating a dead horse, but I just want to clarify this for me.
I just recently purchased a DNS-323 from my local computer shop. I am new to networking and computers in general. The purpose for the DNS purchase was first to back up all the files on my laptop. The second reason I was told that I could stream music and backed up movies through my Xbox 360 with out the computer on. Well I guess we all know the second reason is not working right now. My question is with the new firmware that is supposed to be released anytime now will my Xbox be able to stream the files. I have read so much on this twonky vision and fun plug. But I don't want to have to hack my DNS. Will the new firm ware just let me plug and play. Or will I have to get a tech guy to figure it out.
-
Sorry I feel this is like beating a dead horse, but I just want to clarify this for me.
I just recently purchased a DNS-323 from my local computer shop. I am new to networking and computers in general. The purpose for the DNS purchase was first to back up all the files on my laptop. The second reason I was told that I could stream music and backed up movies through my Xbox 360 with out the computer on. Well I guess we all know the second reason is not working right now. My question is with the new firmware that is supposed to be released anytime now will my Xbox be able to stream the files. I have read so much on this twonky vision and fun plug. But I don't want to have to hack my DNS. Will the new firm ware just let me plug and play. Or will I have to get a tech guy to figure it out.
Yes. Once the firmware is released it will be as simple as adding your media to the network share device then setting your UPNP AV share folder to that media. Once you have indexed your media by clicking the refresh button you will go to the "My XBOX" portion on your Xbox360 and select either Music, Photos or Videos. On that screen you will see your Hard Drive some others(can't remember off the top of my head) and something labeled, "dlink-xxxxx:DNS-321:UPNP-AV" or somethign similar. Once you click on that you can access your data :). Hope that enlightens you.
-
Thank you for the reply. That helps me out.
-
Yes. Once the firmware is released it will be as simple as adding your media to the network share device then setting your UPNP AV share folder to that media. Once you have indexed your media by clicking the refresh button you will go to the "My XBOX" portion on your Xbox360 and select either Music, Photos or Videos. On that screen you will see your Hard Drive some others(can't remember off the top of my head) and something labeled, "dlink-xxxxx:DNS-321:UPNP-AV" or somethign similar. Once you click on that you can access your data :). Hope that enlightens you.
Hi,
I've tried a 1.06 rev firmware ( beta version??? FrodoII-firmware_1.06 ) and the same problem appears like it is on the 1.05 rev.
The XBOX 360 doesn't see at all the DNS-323.
I don't see any differences between the 1.05 and the 1.06 version for this XBOX 360 streaming issue.
As I suspect this version is a beta release may be the XBOX 360 support is not yet implemented?
Best regards
pf
-
Hi,
I've tried a 1.06 rev firmware ( beta version??? FrodoII-firmware_1.06 ) and the same problem appears like it is on the 1.05 rev.
The XBOX 360 doesn't see at all the DNS-323.
I don't see any differences between the 1.05 and the 1.06 version for this XBOX 360 streaming issue.
As I suspect this version is a beta release may be the XBOX 360 support is not yet implemented?
Best regards
pf
Hi again,
I've forgotten to add that this 1.06 firmware (beta?) solved one of my problems with the UPnP A/V function:
Streaming also from the DNS-323 with an H&B DN-8620 and a KISS TECNOLOGY DP600 High Definition media players I'd a serious limitation of 30 entries per directories.
This limitation desapeared with the 1.06 firmware ( FrodoII-firmware_1.06 ).
Is it really a beta?
Best regards
pf
-
If you didn't get it from a D-Link Support web page - for example the US page (http://support.dlink.com/products/view.asp?productid=DNS%2D323), which did not have fw 1.06 at the time of this posting, it's more than likely a "leaked" beta version.
I say "more than likely" because D-Link releases the firmware for different countries at different times and on different websites, I've also never seen D-Link use names - like FrodoII - in their firmware.
-
If you didn't get it from a D-Link Support web page - for example the US page (http://support.dlink.com/products/view.asp?productid=DNS%2D323), which did not have fw 1.06 at the time of this posting, it's more than likely a "leaked" beta version.
I say "more than likely" because D-Link releases the firmware for different countries at different times and on different websites, I've also never seen D-Link use names - like FrodoII - in their firmware.
Hi,
Many thanks for your reply, yes I was "suspecting" a non official firmware, I got it on an external web site to DLink, it's file name is the one I gave you, within the DNS-323 it's reported as the 1.06 firmware (Firmware Version: 1.06), this is why I was confused.
I'm going to use it untill you release the official one with the XBOX 360 support fully functionnal, however I HOPE you'll have solved the UPnP limitation to 30 entries per directories like this FrodoII does.
And please validate this point with something else than the DSM-520 because according your local support this issue doesn't exists because it works fine with the DSM-520 from DLINK.
I use for the moment an H&B DN8620 and a KISS TECHNOLOGY DP600 and on the two this limitation exists. On many other HD madia players too... (and not on the DSM-520 from DLink).
I suspect a bug into the implementation of the UPnP protocol on the DNS-323. Problem already reported to DLink.
In conclusion I really have a need that the DNS-323 been seen on the network by the XBOX 360 and no bugs or limitation to 30 entries with media players than the DLINK one as I see it with the official 1.05 firmware.
Best regards
pf
-
If you didn't get it from a D-Link Support web page - for example the US page (http://support.dlink.com/products/view.asp?productid=DNS%2D323), which did not have fw 1.06 at the time of this posting, it's more than likely a "leaked" beta version.
I say "more than likely" because D-Link releases the firmware for different countries at different times and on different websites, I've also never seen D-Link use names - like FrodoII - in their firmware.
Hi,
This firmware was available on the D-Link China web site some time ago, and the green/grey front page is exactly the same one as the 1.05 or earlier rev, branded D-Link and pointing to the D-Link sites.
The top right mention is:Firmware Version: 1.06 so there is no possibility to see if it is a "leaked" version or not.
I hope the D-Link China site dont play the game to post a "leaked" version...
Best regards
pf
-
There seems to be a bit of 'naiveity' here - did you seriously expect a "leaked" version to have some text identifying it as such?
A leaked version of the firmware could be one that someone either acquired legally and that individual failed to comply with non disclosure agreements and made available to others - or it could be one that someone acquired illegally, by breaking into some one else's poorly secured system.
Leaked does not mean it is not genuine, it means it was not officially released for public use - which in turn means it may have bugs or lack the features of the official release - a greater danger (to my mind) of using leaked firmware is that you do not know it's origin and what may have been changed - is there a root kit or remote access trojan included in that zipped archive?
You may (or may not) have noticed that I did not make a definitive statement saying that it was leaked, but rather, I suggested that it may have been, based on the name, and I questioned where it was obtained from.
The source is what determines whether or not it is official lor leaked - If I gave you a firmware and said it was genuine - you'd have to take my word for it, but if you personally downloaded it from D-Link themselves, then you'd know it was genuine.
I have two questions for you ...
The first - did you personally download that version from a D-Link web site? If not, you really haven't a clue as to it's authenticity.
The second - would you expect an english language firmware on the D-Link China website? Or would you expect one with the web interface translated? The chinese market is not a small one, most manufacturers (including Microsoft) are offering product customized for the market and I know that at least one router manufacturer is offering product with chinese language firmware.
Looking at D-Link China's website - the only firmware currently offered is 1.03b41 - don't you find it a little strange that they would skip 1.04 & 1.05 and offer 1.06 even temporarily? I was unable to download the firmware to see if it matched the 1.03 that was released by D-Link USA, or if it's web interface was in chinese, but the documentation that I could download had been translated.
-
There seems to be a bit of 'naiveity' here - did you seriously expect a "leaked" version to have some text identifying it as such?
...
I have two questions for you ...
The first - did you personally download that version from a D-Link web site? If not, you really haven't a clue as to it's authenticity.
The second - would you expect an english language firmware on the D-Link China website? Or would you expect one with the web interface translated? The chinese market is not a small one, most manufacturers (including Microsoft) are offering product customized for the market and I know that at least one router manufacturer is offering product with chinese language firmware.
Looking at D-Link China's website - the only firmware currently offered is 1.03b41 - don't you find it a little strange that they would skip 1.04 & 1.05 and offer 1.06 even temporarily? I was unable to download the firmware to see if it matched the 1.03 that was released by D-Link USA, or if it's web interface was in chinese, but the documentation that I could download had been translated.
Hi,
Here are the answers to your two questions:
#1
Not personnaly however I TRUST at 200% the person who got it on this website.
Also after doing some search on THIS forum, (September/October) there are some members talking also of this 1.06 rev which was available on the China D-Link web site and now disapeared.
#2
Yes this would not be the first time that a local team in a different country obtain a piece of code for evaluation/test or whatever... piece of code not yet translated.
And sometime some piece of code are even never tranlated...
I'm not talking in particular about D-Link but more generally in the computer business.
And for your info I'm fresly retired from a US computer corporation. So I know what I'm talking about...
Best regards
pf
-
Hello
I've just loaded a beta version of 1.06 and my Xbox 360 can quite happily see and play movies.
I'm not very keen on the way it can show everything or put it in folders, but it works and I'm happy.
Steve
-
Hello
I've just loaded a beta version of 1.06 and my Xbox 360 can quite happily see and play movies.
I'm not very keen on the way it can show everything or put it in folders, but it works and I'm happy.
Steve
Hi Steve,
Where did you get this beta release? which site?
It's not on the US or the French site. The Fr site is still at 1.04!!!...
And which name is it branded?
I'm very confused!
I'm still running an old unofficial version, branded DLink 1.06 (NO BETA mentionned), it works fine and still correct the UPnP A/V problem I've discovered long time ago, BUT the XBox support isn't included.
It would be apparently a leaked version.
My main concern now is to have the XBox support.
Best regards
pf
-
I got the beta version from:
http://www.station-drivers.com/page/dlink.htm (http://www.station-drivers.com/page/dlink.htm)
Just to note that I'm not a 'heavy' user of the DNS-323 and mainly bought it to have a file server to stream movies and do the occasional manual back-up, so I have no idea if this firmware breaks quite a lot of other things. The one I bought it for (Xbox) now works....
Steve
-
I got the beta version from:
http://www.station-drivers.com/page/dlink.htm (http://www.station-drivers.com/page/dlink.htm)
Just to note that I'm not a 'heavy' user of the DNS-323 and mainly bought it to have a file server to stream movies and do the occasional manual back-up, so I have no idea if this firmware breaks quite a lot of other things. The one I bought it for (Xbox) now works....
Steve
Hi again Steve,
Thank you for the response, yes it's the place where I've found my first 1.06 which doesn't see my XBox, the new one [Version 1.06b60 beta (1.06)] says it has chineese characters so I'm reluctant to load it as I don't understand the chineese language...
Wich one are you using?
Best regards
pf
-
I'm using the one at the top, but it isn't in Chinese (in terms of the interface stays in English).
Steve
-
I'm using the one at the top, but it isn't in Chinese (in terms of the interface stays in English).
Steve
ditto, no issues yet, but i havent tried the raid. It does see both my 1.5tb drives and i didnt lose any data when i did the firmware upgrade
-
I got the beta version from:
http://www.station-drivers.com/page/dlink.htm (http://www.station-drivers.com/page/dlink.htm)
Just to note that I'm not a 'heavy' user of the DNS-323 and mainly bought it to have a file server to stream movies and do the occasional manual back-up, so I have no idea if this firmware breaks quite a lot of other things. The one I bought it for (Xbox) now works....
Steve
Hi again Steve,
I dowloaded that firmware [NAS202C_DLINKEu_DNS323.1.06b60(1.55.1106.2008)(BETA) , is it that one you're using?
It works, but I don't see my XBOX, may be I'm doing something wrong at the XBOX side. I'm using a fixed IP for the XBOX.
Which menue are you using to see the DNS-323 from the XBOX?
Does the DNS is seen like a PC or like a Media Center?
I don't understand what I'm doing wrong, the XBOX can go to the Internet but don't see the DNS.
Have great time.
pf
-
I'm using the one at the top, but it isn't in Chinese (in terms of the interface stays in English).
Steve
I forgot to tell you that within the firmware menu I see:
Current Firmware Version : 1.06
Firmware Date : 11/06/2008
Is it the same for you or something else?
It seems to me to be an older version because an old date...
I don't know...
pf
-
I downloaded the one you mentioned (1.06b60).
Have you enabled uPNP from the DNS-323? Even without the new firmware my Xbox 'saw' the DND-323 it just wouldn't play anything.
You may also have to enable uPNP on your router (I have a Draytek and had to do that).
Steve
-
I downloaded the one you mentioned (1.06b60).
Have you enabled uPNP from the DNS-323? Even without the new firmware my Xbox 'saw' the DND-323 it just wouldn't play anything.
You may also have to enable uPNP on your router (I have a Draytek and had to do that).
Steve
OK, yes UPnP is enabled on the DNS-323 and also on the router which is a Sagem Livebox from Orange.
I'm doing UPnP transaction between the DNS-323 and an HD DNS8620 media player from H&B since many months and it works.
The only reason why it won't work with the XBox is that this device has a need of the DLNA protocol which was (is not) implemented into the DNS-323 firmware.
Are you using fixed or DHCP IP address for the Xbox?
How do you see the DNS-323 into the XBox as a PC computer or a Media Center device?
In which menu do you see it within the XBox?
Best regards
pf
-
I just go to My Xbox and then Videos or Music and the DNS-323 appears (alongside my home computer).
Steve
-
I just go to My Xbox and then Videos or Music and the DNS-323 appears (alongside my home computer).
Steve
Hi Steve,
I've tried to modify the XBox network configuration using the IP & DNS using DHCP .
Still the same problem, I don't see the DNS-323 from the XBox.
Don't know what's happening.
pf
-
I downloaded the one you mentioned (1.06b60).
Have you enabled uPNP from the DNS-323? Even without the new firmware my Xbox 'saw' the DND-323 it just wouldn't play anything.
You may also have to enable uPNP on your router (I have a Draytek and had to do that).
Steve
Hi Steve, (the others too...)
FYI I got the 1.06b65 beta version.
It works, however the GUI is in chinese!...
But no problem because identical to the english one.
Best wishes for this year end.
pf