The Graveyard - Products No Longer Supported > DIR-615

DIR-615 Rev T3 only - Firmware 20.22B04 Official Released

(1/3) > >>

GreenBay42:
Firmware is for non-USA Revision T3 only.

Firmware --> http://legacyfiles.us.dlink.com/DIR-615/REVT/FIRMWARE/DIR-615_REVT3_FIRMWARE_20.22B04.zip



Release Notes:

1. Portuguese, Spanish and English version. Default is English.
2. Support On-Page setup page.
3. Disable HT20/40 co-existence by default for DBR/DLA request

Problems Resolved:
1. Fix Repeater issue
2. Blank domain name setting in the GUI of DHCP server

Enhancements:
1. Support WISP mode, IP filter,
2. Add time zone “ GMT+4 Abu Dhabi , Muscat”
3. Add IP filter, Mac filter function
4. WPA2 security enhancement.
5. Add firmware protection

veerendar18:
i am updated my firmware internet not getting
i am followed the ref site https://tnpds.org.in/add-remove-members-smart-card-online-using-tnpds/

FurryNutz:
Link>Welcome!


* What Hardware version is your router? Look at sticker under the router case.
* Link>What Firmware version is currently loaded? Found on the routers web page under status.
* What region are you located?
Please follow this for doing FW updates: Link> >FW Update Process


--- Quote from: veerendar18 on September 27, 2018, 02:03:41 AM ---i am updated my firmware internet not getting
i am followed the ref site https://tnpds.org.in/add-remove-members-smart-card-online-using-tnpds/

--- End quote ---

pkv:
facing issue with the same firmware in connecting with pppoe server config., dhcp and static are working fine though

FurryNutz:
Link>Welcome!


* What region are you located?
[li]Was a Factory Reset performed before and after any firmware updates then set up from scratch?[/li][/list]  Link> >FW Update Process

Internet Service Provider and Modem Configurations

* What ISP Service do you have? Cable or DSL?
* What ISP Modem Mfr. and model # do you have?

--- Quote from: pkv on September 26, 2019, 07:37:13 AM ---facing issue with the same firmware in connecting with pppoe server config., dhcp and static are working fine though

--- End quote ---

Navigation

[0] Message Index

[#] Next page

Go to full version