D-Link Forums
The Graveyard - Products No Longer Supported => Other D-Link Products => DSP-W215 => Topic started by: 128keaton on December 27, 2015, 07:10:17 PM
-
Hello. I've been trying to create something that allows me to use a different interface for the control of the relay. Other people have been able to get into a login page. I get a 404 on the root page.
-
What firmware version do you have? Are you sure that the IP address is correct?
-
Is it really a 404 or just a blank page? In second case it could be an issue with Javascript-forwarding (blocked by a browser-extension?) and you can try to enter http://<ip>/Login.html
-
What firmware version do you have? Are you sure that the IP address is correct?
Version 1.22. Yes, I am.
-
Is it really a 404 or just a blank page? In second case it could be an issue with Javascript-forwarding (blocked by a browser-extension?) and you can try to enter http://<ip>/Login.html
It literally says 404 - Not found.
I've tried the <ip>/Login.html and <ip>/login.html (substituting <ip> for the IP of the plug)
-
Also, as soon as I access the plug via its ip (i.e. loading it in a web browser) it seemingly crashes and I have to reboot the plug (which is manually unplugging and replugging the plug back in)
-
Hello. I've been trying to create something that allows me to use a different interface for the control of the relay. Other people have been able to get into a login page. I get a 404 on the root page.
I had the same issue and this worked for me..
Try this:
http://Device_IP/login_real.htm