Topic: Cannot stay logged into DAP-1522 after F/w upgrade (Read 6306 times)

gplung · « **on:** September 30, 2012, 09:41:06 PM »

I up graded to latest f/w. Now I can only log into the unit for about 1 minute before a get a limited connectivity warning, then it boots me out. Any Ideas?

FurryNutz · « **Reply #1 on:** October 01, 2012, 08:43:08 AM »

What mode are you using the DAP in? AP, Bridge?
What wireless modes are you using? Try single mode G or N or mixed G and N?
Channel Width set for Auto 20/40Mhz or try 20Mhz only.
Try setting a manual channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear.
What security mode are you using? Preferred security is WPA-Personal. WPA2/AES Only. Some WiFi adapters don't support AES, so you might want to try TPIK only or Auto.

Any cordless house phones?
Any other WiFi routers in the area? Link> Use InSSIDer to find out. How many?

D-Link Forums

News:

Author Topic: Cannot stay logged into DAP-1522 after F/w upgrade (Read 6306 times)

gplung

Cannot stay logged into DAP-1522 after F/w upgrade

FurryNutz

Re: Cannot stay logged into DAP-1522 after F/w upgrade