• March 28, 2024, 02:22:50 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: How to disable SSH access to the router from the WAN interface?  (Read 4611 times)

sambha

  • Level 1 Member
  • *
  • Posts: 3
How to disable SSH access to the router from the WAN interface?
« on: January 11, 2019, 08:49:49 AM »

I just discovered that my D-Link DSL-2750U router is by default accessible on the WAN IP via ssh. How do I disable this?

This a serious security issue as the ssh login has the same default credentials as printed on the back of the router. I already saw 100's of login attempts on the system log in about 10 hours since the router is running.
Code: [Select]
Fri Jan 11 14:16:53 2019 31 other username=admin password=admin fail
Fri Jan 11 14:16:54 2019 31 other username=admin password=cisco fail
Fri Jan 11 14:16:55 2019 31 other username=admin password=administrator fail
.....

 Luckily the first thing I do when I setup a new router is to change the default password.
Logged

GreenBay42

  • Administrator
  • Level 11 Member
  • *
  • Posts: 2752
Re: How to disable SSH access to the router from the WAN interface?
« Reply #1 on: January 11, 2019, 09:15:14 AM »

What hardware version do you have?

Current firmware?
Logged

GreenBay42

  • Administrator
  • Level 11 Member
  • *
  • Posts: 2752
Re: How to disable SSH access to the router from the WAN interface?
« Reply #2 on: January 11, 2019, 09:20:42 AM »

Depending on the firmware and your region, log into the router web UI, go to Maintenance > Access Controls. Click the Services button.

Uncheck SSH and then click Apply.
Logged

sambha

  • Level 1 Member
  • *
  • Posts: 3
Re: How to disable SSH access to the router from the WAN interface?
« Reply #3 on: January 11, 2019, 09:27:25 AM »




There is no Maintainence--> Access Control page.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: How to disable SSH access to the router from the WAN interface?
« Reply #4 on: January 11, 2019, 09:47:49 AM »

What happens if you select the Maintenance tab?

Your picture is of the Status Tab.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

sambha

  • Level 1 Member
  • *
  • Posts: 3
Re: How to disable SSH access to the router from the WAN interface?
« Reply #5 on: January 11, 2019, 12:19:03 PM »

Status was for the model number firmware etc.
Here's the maintenance tab:




The "system" link at the top just has options to save/backup/reset config.
the password tab has user managment.
Logged