• April 18, 2024, 05:37:51 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DNS 320- 4TB combining 2 DNS to work as one  (Read 2721 times)

irfanbaradia

  • Level 1 Member
  • *
  • Posts: 2
DNS 320- 4TB combining 2 DNS to work as one
« on: June 30, 2014, 02:33:50 AM »
hi,

i have a DNS 320- 4TB. the settings for my HDD is RAID 1 which is using all 2 HDDs at once. the space is low and i want to add another DNS 320- 4TB with same IP address and same back-up drive. is it possible?

your help will be highly appreciated

thank you
Logged

ivan

  • Level 8 Member
  • ***
  • Posts: 1480
Re: DNS 320- 4TB combining 2 DNS to work as one
« Reply #1 on: June 30, 2014, 03:49:48 AM »
NO.

You can not have any two devices on a network with the same IP address, the network will not know where to send the data.  This is built in to the ethernet standard to which all manufacturers must comply.

Assuming your backup drive has the capacity and is also on the network there is nothing stopping you backing up an additional DNS-320 to it (we backup all our various NAS to one of our server controlled storage centres every night).   
Logged

hoppo1

  • Level 2 Member
  • **
  • Posts: 89
Re: DNS 320- 4TB combining 2 DNS to work as one
« Reply #2 on: July 07, 2014, 06:29:28 AM »
Or. you could reconfigure them both to be JBOD therefore giving you 8gb on each. then use one for live and the other for backup and replicate the data between the two.
Logged