D-Link Forums
D-Link IP Cameras for Home => DCS series Network Cameras => Topic started by: Ben10dk on October 13, 2010, 11:57:02 AM
-
I have just purchased a DCS 2121 (I assume that it is a similar model to the DCS 920 in US).
I have this setup:
- Connected the DCS 2121 wireless to my Belkin Router with a fixed IP address. Firmware version 1.4 is installed on the camera.
- I have a Synology 209 NAS server with survailance station that I have connected to the Camera.
I all works fine for 5 minutes to a couple of hours at which point the DCS 2121 loose connection to the Router and does not try to reconnect. If I turn the Cam on and off it will reconnect - and then loose connection again af a short time.
This is totally frustrating since the purpose of the Cam is to work as a surveilance cam - it kinda loose its value by not beeing connected...
Any help will e highly appreaciated
-
I have just purchased a DCS 2121 (I assume that it is a similar model to the DCS 920 in US).
I have this setup:
- Connected the DCS 2121 wireless to my Belkin Router with a fixed IP address. Firmware version 1.4 is installed on the camera.
- I have a Synology 209 NAS server with survailance station that I have connected to the Camera.
I all works fine for 5 minutes to a couple of hours at which point the DCS 2121 loose connection to the Router and does not try to reconnect. If I turn the Cam on and off it will reconnect - and then loose connection again af a short time.
This is totally frustrating since the purpose of the Cam is to work as a surveilance cam - it kinda loose its value by not beeing connected...
Any help will e highly appreaciated
Of course there is no help. because there is no work-around to a lousy product and zero support. I have the same problem with my DCS920, and I think the only way to solve it is to buy another brand. If I am wrong, then great... please let us know how to fix this.