D-Link VPN Router > DSR-1000AC

QOS for VOIP

(1/3) > >>

scoody:
Hi,

I have 4 phones on VOIP their IP are DHCP adresses. 
The Dlink is connected 100meg half duplex to a fiber router
My internet access is a fiber link 10meg up and 10meg down

My link 10 meg is regulary 100% used and phone are unusables.

How can i set QOS for preserving the voice quality ?  On ports on IP ??   

I made : Network / traffic management
then bandwith profil , where i have created  a plocicy 'phone out'   (outband/prority/dedicated/high)
Thren created services in traffic shapping menu on SIP TCP and SIP UDP protocols
Activated also Bride profiles

But i'm lost ....

Laurent






Thanks for your help

Gattsu:
You can try the following.

-Create a Customer Service-
name: SIP-Both
Source Port Start: 1
Source Port End: 65535
Destination Port Start: 5060
Destination Port End: 5060

Create a Bandwidth Profile-
name: OutboundForSip
Policy Type: outbound
WAN interface: Dedicated WAN
Profile Type: Rate (or Priority)
Min. Band Rate: 1
Max. Band Rate: 2000

-Create a new Traffic Selector-
Available Profile: OutboundForSip
Service: SIP-Both
Traffic Selector Match Type: IP
IP address: 192.168.10.1 (which ever the IP/network of phones)
Subnet Mask: 255.255.255.0

scoody:
great, just when i go in "Bridge Trafic Selectors" , in the dropdown list i have nothing.
Custom service and bandwith profile are created with parameters you gave, no trouble on this part.

I will have to do this 4 times for the 4 phones ?

Gattsu:
Just make sure your DSR-1000AC is updated to the latest firmware version followed by a factory reset. Please try again with a different web-browser.

Yes this should work for all phones using SIP protocol in the network of 192.168.10.X with mask 255.255.255.0. If it was for a single device then it would be set 192.168.10.X with mask 255.255.255.255.

scoody:
Hi,
My firmware is 3.11_WW ,

i created the Bandwidth Profile- in BRIDGE bandwidth instead of bandwidth profile then i was able to select it in dropdown menu .

how can i monitor if it works ?   

The Phone quality is still bad.

Thanks for your help .

Laurent

Navigation

[0] Message Index

[#] Next page