D-Link VPN Router > DSR-250

Port forwarding on DSR-250

(1/2) > >>

rico:
Hello everyone. I'm a total newb at port forwarding. I have a DSR-250 A4 F/W 2.11_WW. My region is North America (Canada). I'm trying to port forward 8443 to 443. I've followed settings from other posts on this forum. I've printed and gone through the manual. Nothing seems to work. I've honestly tried so many things I don't know what goes where anymore. If any one can help it would be appreciated. You may need to write out the instructions in crayon I'm so lost. Do I use Custom service, Dynamic port forwarding, Firewall rules? What do I enter where? So you know this is from an outside connection coming in to a server. Thank you again in advance.

FurryNutz:
Link>Welcome!


Internet Service Provider and Modem Configurations

* What ISP Service do you have? Cable or DSL?
* What ISP Modem Mfr. and model # do you have? Built in router by chance?
Also when configuring Port Forwarding, you need to
* Disable uPnP as well. Disable uPnP for testing Port Forwarding rules.

rico:
Hi FurryNutz, I have a 200m fibre connection, the modem/appliance is a Nokia SAS-D my ISP has told me there are no blocked ports. I've checked the DSR-250 and UPnP is off already.

Thanks

GreenBay42:
Go to Security > Custom Service.

Name- create a name
Type - TCP
Port Type - Port Range
Source Start Port - 1
Source Finish Port - 65535
Dest Start Port - 8443
Dest Finish Port - 8443

Save it

Then go to Firewall Rules > add

From zone - Insecure WAN
To Zone - Secure LAN
Service - Scroll to bottom for the one you created above
Action - Always Allow
Source hosts - Any (or if you know the IP of the computer on the internet)
Internal IP address - IP Address of your server
Enable port forwarding - ON
Translate Port Number - 443
External IP address - WAN

Save it

FurryNutz:
Any status on this?  ???


--- Quote from: rico on January 11, 2018, 10:07:53 AM ---Hi FurryNutz, I have a 200m fibre connection, the modem/appliance is a Nokia SAS-D my ISP has told me there are no blocked ports. I've checked the DSR-250 and UPnP is off already.

Thanks

--- End quote ---

Navigation

[0] Message Index

[#] Next page