Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[puttaw]

Hi
I just wonder how many clients can I connect to the DIR-3060?
//P

[FurryNutz]

Should be over 30 I would presume.

[Mr.Mom]

maximum client capacity
DIR-3060 A1 : 119

[puttaw]

Many thank you for the answers
 Where can I read about this information? ... since I have many wifi home smart products but always get a maximum of 64 clients via the app, I wonder what is right as I have more than 80 and some lose their wifi from and to.
//P

[FurryNutz]

Is this thru the D-Link app or the routers web page?

 

Many thank you for the answers
 Where can I read about this information? ... since I have many wifi home smart products but always get a maximum of 64 clients via the app, I wonder what is right as I have more than 80 and some lose their wifi from and to.
//P

[puttaw]

Both thru app and web page.

[puttaw]

Anyone ...is it 119 clients?
"Where can I read about this information? ... since I have many wifi home smart products but always get a maximum of 64 clients via the app and router, I wonder what is right as I have more than 80 and some lose their wifi from and to."
//P

[Mr.Mom]

From roduct planner : "For user experience, one radio for 15 person."

Below is ixVeriWave maximum client capacity test result :

DIR-1360 A1 : 119

DIR-1760 A1 : 121

DIR-1960 A1 : 121

DIR-2660 A1 : 121

DIR-3060 A1 : 119

[puttaw]

Thanks
 Have now tried to remove a lot of wifi clients and now have 59 and then everything feels much more stable ... has mostly cameras and smart plug. But when I had about 80 wifi clients, many dropped out from time to time and it still showed only 64 clients in both the app and via the router.
What could this be due to?

[FurryNutz]

As a suggestion and recommendation to not overload the router and better help share and spread out the connections with all of your devices, you may want to install a DAP extender in addition to the router so that some of your devices can connect to the extender and better help the router with connections and device loads.

[Bildos]

Just buy 2nd router. It's not very expensive.. 

[FurryNutz]

Any updates on this?

Hi
I just wonder how many clients can I connect to the DIR-3060?
//P

[puttaw]

Hi again ... how do I use two routers if I now want to distribute many wifi clients so one router does not take everything ... what does such a configuration look like?

//P

[FurryNutz]

Turning a router into an AP.

You would being using different far apart channels between the two routers, i.e. channel 1 on the 1st router and channel 11 on the 2nd router in AP mode on 2.4Ghz. Same with 5Ghz channels.

You can try setting same SSID and PW on each router, now sure if this will work, if not, use a different SSID name to test on the 2nd router in AP mode.

[puttaw]

Can I use d-link dir 880L for a second router so I can use more wifi clients total.
My Dir-3060 have around 80 wifi clients now and can not take more and I want some more.
How do I connect to routers with each other?
//P