D-Link Forums

The Graveyard - Products No Longer Supported => Routers / COVR => DIR-615 => Topic started by: GreenBay42 on February 06, 2018, 06:46:37 AM

Title: DIR-615 Rev T3 only - Firmware 20.22B04 Official Released
Post by: GreenBay42 on February 06, 2018, 06:46:37 AM
Firmware is for non-USA Revision T3 only.

Firmware --> http://legacyfiles.us.dlink.com/DIR-615/REVT/FIRMWARE/DIR-615_REVT3_FIRMWARE_20.22B04.zip (http://legacyfiles.us.dlink.com/DIR-615/REVT/FIRMWARE/DIR-615_REVT3_FIRMWARE_20.22B04.zip)



Release Notes:

1. Portuguese, Spanish and English version. Default is English.
2. Support On-Page setup page.
3. Disable HT20/40 co-existence by default for DBR/DLA request

Problems Resolved:
1. Fix Repeater issue
2. Blank domain name setting in the GUI of DHCP server

Enhancements:
1. Support WISP mode, IP filter,
2. Add time zone “ GMT+4 Abu Dhabi , Muscat”
3. Add IP filter, Mac filter function
4. WPA2 security enhancement.
5. Add firmware protection

Title: Re: DIR-615 Rev T3 only - Firmware 20.22B04 Official Released
Post by: veerendar18 on September 27, 2018, 02:03:41 AM
i am updated my firmware internet not getting
i am followed the ref site https://tnpds.org.in/add-remove-members-smart-card-online-using-tnpds/ (https://tnpds.org.in/add-remove-members-smart-card-online-using-tnpds/)
Title: Re: DIR-615 Rev T3 only - Firmware 20.22B04 Official Released
Post by: FurryNutz on September 27, 2018, 06:39:44 AM
Link>Welcome! (http://forums.dlink.com/index.php?topic=49573.0)


Please follow this for doing FW updates: Link> >FW Update Process (http://forums.dlink.com/index.php?topic=42457.0)

i am updated my firmware internet not getting
i am followed the ref site https://tnpds.org.in/add-remove-members-smart-card-online-using-tnpds/ (https://tnpds.org.in/add-remove-members-smart-card-online-using-tnpds/)
Title: Re: DIR-615 Rev T3 only - Firmware 20.22B04 Official Released
Post by: pkv on September 26, 2019, 07:37:13 AM
facing issue with the same firmware in connecting with pppoe server config., dhcp and static are working fine though
Title: Re: DIR-615 Rev T3 only - Firmware 20.22B04 Official Released
Post by: FurryNutz on September 26, 2019, 09:12:19 AM
Link>Welcome! (http://forums.dlink.com/index.php?topic=49573.0)


[li]Was a Factory Reset performed before and after any firmware updates then set up from scratch?[/li][/list]  Link> >FW Update Process (http://forums.dlink.com/index.php?topic=42457.0)

Internet Service Provider and Modem Configurations

facing issue with the same firmware in connecting with pppoe server config., dhcp and static are working fine though
Title: Re: DIR-615 Rev T3 only - Firmware 20.22B04 Official Released
Post by: mrxx on April 17, 2021, 10:28:21 PM
Firmware is for non-USA Revision T3 only.

Firmware --> ftp://FTP2.DLINK.COM/PRODUCTS/DIR-615/REVT/DIR-615_REVT3_FIRMWARE_20.22B04.zip (ftp://FTP2.DLINK.COM/PRODUCTS/DIR-615/REVT/DIR-615_REVT3_FIRMWARE_20.22B04.zip)

Release Notes:

1. Portuguese, Spanish and English version. Default is English.
2. Support On-Page setup page.
3. Disable HT20/40 co-existence by default for DBR/DLA request

Problems Resolved:
1. Fix Repeater issue
2. Blank domain name setting in the GUI of DHCP server

Enhancements:
1. Support WISP mode, IP filter,
2. Add time zone “ GMT+4 Abu Dhabi , Muscat”
3. Add IP filter, Mac filter function
4. WPA2 security enhancement.
5. Add firmware protection


i cant download from ftp
pls help
Title: Re: DIR-615 Rev T3 only - Firmware 20.22B04 Official Released
Post by: FurryNutz on April 18, 2021, 07:32:23 PM
The main link post was corrected, try it again.

Firmware is for non-USA Revision T3 only.

Firmware --> ftp://FTP2.DLINK.COM/PRODUCTS/DIR-615/REVT/DIR-615_REVT3_FIRMWARE_20.22B04.zip (ftp://FTP2.DLINK.COM/PRODUCTS/DIR-615/REVT/DIR-615_REVT3_FIRMWARE_20.22B04.zip)

Release Notes:

1. Portuguese, Spanish and English version. Default is English.
2. Support On-Page setup page.
3. Disable HT20/40 co-existence by default for DBR/DLA request

Problems Resolved:
1. Fix Repeater issue
2. Blank domain name setting in the GUI of DHCP server

Enhancements:
1. Support WISP mode, IP filter,
2. Add time zone “ GMT+4 Abu Dhabi , Muscat”
3. Add IP filter, Mac filter function
4. WPA2 security enhancement.
5. Add firmware protection


i cant download from ftp
pls help
Title: Re: DIR-615 Rev T3 only - Firmware 20.22B04 Official Released
Post by: mrxx on April 22, 2021, 07:21:35 PM
The main link post was corrected, try it again.

Firmware is for non-USA Revision T3 only.

Firmware --> ftp://FTP2.DLINK.COM/PRODUCTS/DIR-615/REVT/DIR-615_REVT3_FIRMWARE_20.22B04.zip (ftp://FTP2.DLINK.COM/PRODUCTS/DIR-615/REVT/DIR-615_REVT3_FIRMWARE_20.22B04.zip)

Release Notes:

1. Portuguese, Spanish and English version. Default is English.
2. Support On-Page setup page.
3. Disable HT20/40 co-existence by default for DBR/DLA request

Problems Resolved:
1. Fix Repeater issue
2. Blank domain name setting in the GUI of DHCP server

Enhancements:
1. Support WISP mode, IP filter,
2. Add time zone “ GMT+4 Abu Dhabi , Muscat”
3. Add IP filter, Mac filter function
4. WPA2 security enhancement.
5. Add firmware protection


i cant download from ftp
pls help


bro i cant download from ftp
pls send file cansixx@gmail.com
tnks
Title: Re: DIR-615 Rev T3 only - Firmware 20.22B04 Official Released
Post by: FurryNutz on April 22, 2021, 08:24:41 PM
Try the very first link again.
Title: Re: DIR-615 Rev T3 only - Firmware 20.22B04 Official Released
Post by: mrxx on April 24, 2021, 02:28:37 AM
Try the very first link again.

tanks bro
you really good man
tnks everything ;)
Title: Re: DIR-615 Rev T3 only - Firmware 20.22B04 Official Released
Post by: mrxx on April 24, 2021, 03:34:06 AM
Try the very first link again.

tanks bro
but wifi repeater
connection  to  intent Device
but dont sharing internet
Title: Re: DIR-615 Rev T3 only - Firmware 20.22B04 Official Released
Post by: tapabrata on July 02, 2021, 10:09:28 AM
I am using Dlink DIR 615 N300 router. Hardware v- t3 . firmware-20.22 . i'm facing high ping issue. Earlier i used to get1 ms maximum ping , now I'm getting 7-8 max ping.  How to fix this?