• October 10, 2024, 12:26:08 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Facing Error - 192.168.100.1  (Read 10117 times)

rafaelsolano

  • Level 1 Member
  • *
  • Posts: 2
Facing Error - 192.168.100.1
« on: December 24, 2018, 02:53:50 AM »

Hi, my router D-link DIR-655 is connected to a cable modem.  The Router IP Address is "192.168.0.1".

The modem has a fixed IP address  "192.168.100.1"  to access its  status page/setup from LAN. So I am able to assess the modem  status page from my local computer Web browser when typing  "192.168.100.1".

When I want to set up Port Forwarding (or Virtual Server) with local IP address "192.168.100.1" and try to Save, I get an error message "invalid host ip address".

I guess the router only accepts/saves   addresses  192.168.0.x.

How to overcome this restriction?
Logged

rickys

  • Level 1 Member
  • *
  • Posts: 2
Re: Facing Error - 192.168.100.1
« Reply #1 on: December 25, 2018, 11:08:18 PM »

I am not sure about this but I think this, but I think a home office network might use addresses in the range of 192.168.100.2 to 192.168.100.20. The address "192.168.100.1" is out of the network's range and would be an invalid address. If still, you can't figure it out then this guide https://routerlogin.onl/192-168-100-1/ might help you out.
« Last Edit: December 26, 2018, 02:07:01 AM by rickys »
Logged

GreenBay42

  • Administrator
  • Level 11 Member
  • *
  • Posts: 2752
Re: Facing Error - 192.168.100.1
« Reply #2 on: December 26, 2018, 06:51:26 AM »

If your router is 192.168.0.1, your local IP range is 192.168.0.xxx.

If your modem a router also or just a modem? If it is just a modem what kind of port forwarding are you trying to do?

Is the WAN IP address on the dlink router 192.168.xx.xx? or a public IP address?
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Facing Error - 192.168.100.1
« Reply #3 on: December 26, 2018, 12:10:56 PM »

Link>Welcome!

  • What Hardware version is your router? Look at sticker under the router case.
  • Link>What Firmware version is currently loaded? Found on the routers web page under status.
  • What region are you located?

Internet Service Provider and Modem Configurations
  • What ISP Service do you have? Cable or DSL?
  • What ISP Modem Mfr. and model # do you have?

You don't need to set up any Port Forwarding or Virtual Services with the ISP modem. 192.168.100.1 is the log in page for most cable modems for the modems management page only. Nothing else is at this address. You can't configure this IP address on the WAN side of the DIR router.

Hi, my router D-link DIR-655 is connected to a cable modem.  The Router IP Address is "192.168.0.1".

The modem has a fixed IP address  "192.168.100.1"  to access its  status page/setup from LAN. So I am able to assess the modem  status page from my local computer Web browser when typing  "192.168.100.1".

When I want to set up Port Forwarding (or Virtual Server) with local IP address "192.168.100.1" and try to Save, I get an error message "invalid host ip address".

I guess the router only accepts/saves   addresses  192.168.0.x.

How to overcome this restriction?
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

rafaelsolano

  • Level 1 Member
  • *
  • Posts: 2
Re: Facing Error - 192.168.100.1
« Reply #4 on: December 26, 2018, 09:00:13 PM »

If your router is 192.168.0.1, your local IP range is 192.168.0.xxx.

If your modem a router also or just a modem? If it is just a modem what kind of port forwarding are you trying to do?

Is the WAN IP address on the dlink router 192.168.xx.xx? or a public IP address?

Hi, thanks for reaching out. Yes, I am using the DIR 655 Router. (https://www.dlink.com.au/business-solutions/DIR-655-wireless-n-gigabit-router)
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Facing Error - 192.168.100.1
« Reply #5 on: December 26, 2018, 09:39:04 PM »

Please let us know about the other questions...
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.