• November 02, 2024, 09:03:56 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DCS Network Cameras - Should I Use DHCP, Static IP, or Reserved IP Address?  (Read 34589 times)

JavaLawyer

  • BETA Tester
  • Level 15 Member
  • *
  • Posts: 12190
  • D-Link Global Forum Moderator
    • FoundFootageCritic

The protocol a D-Link network camera uses to connect to a router may cause issues if not properly configured. This FAQ entry describes the different ways a D-Link network camera can connect to a network and the pros and cons of each approach.

1. Basic Definitions

  • DHCP - DHCP is the default configuration a new D-Link network camera is configured for out-of-the-box. Using DHCP, when the camera connects to a router, the router will assign an IP address to the camera that falls within the valid IP address range defined for the router
  • Reserved IP - Reserving an IP address is configured from the host router web UI (not the network camera). Using this option, the end-user selects a specific IP address for the network camera and reserves the IP address in the router. The reserved IP address will always be made available for the network camera, even if the camera disconnects/reconnects to the network
  • Static IP - A static IP address is configured in the client network camera web UI (not the router). A static IP address forces the router to assign a specific IP address to the camera each and every time the camera connects to the router. The address is called static because the client device will always request the same IP address regardless of the router or network the client device is connected to

2. DHCP - Dynamic Host Configuration Protocol

DHCP is the default configuration a new D-Link network camera is configured for out-of-the-box. Using DHCP, when the camera connects to a router, the router will assign an IP address to the camera that falls within the valid IP address range defined for the router.

DHCP IP address assignment rules:

  • IP addresses are assigned by the router either randomly or using a set of rules built into the router
  • IP addresses are assigned within the valid IP address range defined for the router. If a router is configured with the IP address range of 192.168.0.1 to 192.168.0.10, then the router may assign the IP address 192.168.0.x, where x is a value between 1 and 10
  • The IP address 192.168.0.1 is typically reserved for the router itself and is therefore not available for other devices to use
  • Since the DHCP protocol assigns IP addresses either randomly or using a set of rules, the network camera IP address is subject to change every time the camera disconnects/reconnects to the network

Sample scenario:

  • Assume a router is configured with the IP address range of 192.168.0.1 to 192.168.0.10
  • When the network camera attempts to connect with the router, the router assigns the IP address 192.168.0.5 (which falls within the range of 1 to 10)
  • If the camera disconnects/reconnects from the network, the router assigns a new IP address, 192.168.1.9

3. Reserving an IP Address

Reserving an IP address is configured from the router web UI (not the network camera). Using this option, the end-user selects a specific IP address for the network camera and reserves the IP address in the router. The reserved IP address will always be made available for the network camera, even if the camera disconnects/reconnects to the network.

Reserved IP address rules:

  • IP address reservations are made from within the router (not the camera)
  • When using IP address reservations, the network camera should be configured to DHCP
  • The reserved IP address should stay within the valid IP address range defined for the router. If a router is configured with the IP address range of 192.168.0.1 to 192.168.0.10, then the end-user may reserve the IP address 192.168.0.x, where x is a value between 2 and 10 (the value 1 is typically reserved for the router itself)
  • A reserved IP address is associated to the MAC address of the network camera
  • Once and IP address is reserved to a specific network camera, only that network camera can use the IP address. Other network devices cannot use the IP address

Sample scenario:

  • Assume a router is configured with the IP address range of 192.168.0.1 to 192.168.0.10
  • The IP address 192.168.0.5 is reserved for the network camera (saved in the router web UI)
  • When the network camera attempts to connect with the router, the router assigns the IP address 192.168.0.5
  • If the camera disconnects/reconnects from the network, the router assigns the IP address, 192.168.1.5

4. Static IP Address

A static IP address is configured in the D-Link network camera web UI (not the router). A static IP address forces the router to assign a specific IP address to the camera each and every time the camera connects to the router. However, there are circumstances where the router may not be able to provide the IP address requested by the network camera.

Static IP address rules:

  • IP address reservations are made from within the network camera (not the router)
  • The static IP address should stay within the valid IP address range defined for the router. If a router is configured with the IP address range of 192.168.0.1 to 192.168.0.10, then the end-user may select a static IP address of 192.168.0.x, where x is a value between 2 and 10 (the value 1 is typically reserved for the router itself)
  • Setting a static IP address in the network camera forces the router to give the IP address to the network camera, even if another device is currently using the same IP address
  • Every time the network camera disconnects/reconnects to the network, the network camera will request the same IP address

Sample scenario:

  • Network camera is configured with the static IP address 192.168.0.5
  • Network camera joins the network using IP address 192.168.0.5
  • Network camera briefly loses power and drops from the network
  • Router releases the IP address (since the camera is no longer using it)
  • Laptop joins the network
  • Router assigns the laptop the next free IP address: 192.168.0.5
  • Network camera tries to re-joins the network using IP address: 192.168.0.5
  • Network camera and laptop experience an IP address conflict

5. Best Approach: Reserved IP Address

  • IP Address reservations are the preferred and safest method to manage D-Link network camera connectivity
  • The router (as the brains of the network) should be permitted to manage the IP addresses of all devices connected to the network, a task the router was designed to perform. This approach ensures centralized IP address management and minimizes the possibility of network issues and conflicts.
  • Using pure DHCP will result in network cameras changing IP addresses, resulting in potential access issues if specific IP addresses are bookmarked in a browser or port forwarding is utilized
  • Since the router doesn't manage static IP addresses, using pure static IP addresses may result in IP address conflict and connectivity issues if multiple network devices are competing for the same IP address

Additional Resources

« Last Edit: December 18, 2014, 03:58:37 PM by JavaLawyer »
Logged
Find answers here: D-Link ShareCenter FAQ I D-Link Network Camera FAQ
There's no such thing as too many backups FFC