• March 29, 2024, 08:40:57 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DGS-1210-16 routing issue  (Read 2125 times)

patl

  • Level 1 Member
  • *
  • Posts: 9
DGS-1210-16 routing issue
« on: December 07, 2018, 12:54:14 AM »

hello,

i want to route to vlans through my dlink switch with L3 features
my conf :
VLAN10 : 192.168.1.0/24 (Gw dlink ip 192.168.1.250)
VLAN30 : 192.168.0.0/24 (Gw dlink ip 192.168.0.250)

ex port 5 : in vlan10 + PVID 10
ex port 13 : vlan30 + PVID30

from port 5 (vlan10) i can ping the dlink gateway in the vlan 30 (192.168.0.250), but i can't ping the endpoints in the vlan30
from the switch : i can ping all devices
from devices in vlan30 i can ping dlink GW (both side)

i have an ACL that allow all traffic for all ports
with debug info command, i can see mac and arp that are ok
when i do a tcpdump, i can see the icmp packet on the original VLAN and not routed on the destination VLAN

can you help me ?

thanks

« Last Edit: December 07, 2018, 01:03:13 AM by patl »
Logged

patl

  • Level 1 Member
  • *
  • Posts: 9
Re: DGS-1210-16 routing issue
« Reply #1 on: December 07, 2018, 02:39:17 AM »

in complement :
Firmware Version   7.11.b08
Hardware Version   G1
« Last Edit: December 07, 2018, 07:23:31 AM by patl »
Logged