• July 15, 2024, 07:19:14 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  


This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Configuration  (Read 17570 times)


  • Level 1 Member
  • *
  • Posts: 1
« on: December 19, 2009, 03:54:15 PM »

I received a note with the DVG-2001S, which has five steps on "How to Configure DVG-2001s:"

1. Connect it to any LAN port of your router;
2. **1 to get the IP address of this ATA;
3. http://iP address of ATA/admin and login as admin/admin
4. Configure VOIP - both server & agent config
5. Apply & Reboot

How does one accomplish step 2? Where does one input **1?

I have tried vainly to use the quick start guide to configure the dvg-2001s with Mac OS X 10.5 so I hope there is another way. I can also boot the computer in Windows Vista.
« Last Edit: December 19, 2009, 03:56:45 PM by wrmcpherson »


  • Level 1 Member
  • *
  • Posts: 1
Re: Configuration
« Reply #1 on: December 31, 2009, 07:57:29 AM »

Plug a phone in the box while its powered on and connected to your router then dial **1.  An automated voice will read you the current IP address for the box.