Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[FurryNutz]

Any status on this? 
Nobody else has reported any problems.

Just checking all my DIR-880L setting recently and I noticed that the DDNS is in disconnected status.  I've checked the dlinkddns.com website and the date last modified is before I upgraded to 1.07 beta.  Did someone encounter this kind of problem?  Or is this just isolated problem of mine?  Tried rebooting the PPPOE connection DIR-880L many times but still can't connect to dlinkddns.com

[nettewurk]

Sorry for not comprehending the details and causes of these issues indicated in the report.  Any hints or bug cause that also affects this problem.  Hope to get some information on his mecical result while waiting for his brother.  Thanks again soon

[FurryNutz]

You might do a manual reload of the FW then factory reset the router and set up the router and DDNS from scratch.

[nettewurk]

Any status on this? 
Nobody else has reported any problems.

Just checking all my DIR-880L setting recently and I noticed that the DDNS is in disconnected status.  I've checked the dlinkddns.com website and the date last modified is before I upgraded to 1.07 beta.  Did someone encounter this kind of problem?  Or is this just isolated problem of mine?  Tried rebooting the PPPOE connection DIR-880L many times but still can't connect to dlinkddns.com

Sorry but I made a mistake in inputting the DDNS setting on its server selection.  It should be dyndns.org, instead of DLINKDDNS.  But input the host name  as xxxxxx.dlinkddns.com.  Now it works!!!

[FurryNutz]

Glad you got it working. Thanks for posting the resolution. Hope it helps future users.

Enjoy.

[nettewurk]

Thanks for the response.

Would this become the official 1.07 release?  Or will there be beta 01 and so on first?  I hope that the reported bugs here would be resolved and official WWW release would be available.  But again, some items reported here in the wish list are still being expected in the future release.

Regards to all.

[FurryNutz]

I don't have that information. I am keeping up with the current bug list and have passed that on to D-Link. I keep asking for status here and there. I presume next released, I hope, will have fixes.

 

[Mark_KF8RV]

It looks like D-Link has made it an official release: Firmware 1.07.B08 is available at http://support.dlink.com/ProductInfo.aspx?m=DIR-880L

I installed it and it seems fine to me.

http://support.dlink.com/ProductInfo.aspx?m=DIR-880L

[FurryNutz]

Thanks for letting us know. I never get word on when releases are posted.

One thing, Does Smart Connect work for you and are you seeing only 1 SSID name coming from your 880L when SC is enabled?

It looks like D-Link has made it an official release: Firmware 1.07.B08 is available at http://support.dlink.com/ProductInfo.aspx?m=DIR-880L

I installed it and it seems fine to me.

http://support.dlink.com/ProductInfo.aspx?m=DIR-880L

[Mark_KF8RV]

I don't use Smart Connect.  Never tried it.

[FurryNutz]

When you have some time, would you enable it and test this please?
If you can review the bug list and let us know if you still see any problems or if they seem fixed, please let us know:
http://forums.dlink.com/index.php?topic=59562.msg267757#msg267757

I don't use Smart Connect.  Never tried it.

[Mark_KF8RV]

When I get a chance, I will look into Smart Connect and perhaps a few of the reported bugs. 

[FurryNutz]

Thank you sir.

When I get a chance, I will look into Smart Connect and perhaps a few of the reported bugs.

[Eluder]

Not sure if I should be posting this here or a separate thread, but there's a serious issue with this firmware.
I've got a Canadian unit which uses the same 1.07 (did a binary comparison of the US and Canadian firmware, identical) and when using this firmware, most of my devices have very high latency. Basically making using the devices over wifi unusable. I've tried it with multiple devices (Nexus 6p, HTC One M9, One A9, DAP-1650, etc) and running speed tests I see the ping time (30+ms) and even locating the nearest server takes a really long time. The only devices that operate ok are my iPhone 6s Plus, no idea why, but everything else lags to heck.  I know it's the router as I have two other AC routers (backup routers) that I tested with the same devices and they work flawlessly (sub 10ms pings and no latency whatsoever).

I was able to rectify this issue by flashing down to v1.06 for the DIR-880l and now all those afflicted devices run as normal, so I am using that version for now.  I have contacted D-link support and provided all this information, but wanted to post here as well just in case it can get to their Engineers more directly, there's obviously a bug that was introduced in 1.07 that is causing this high latency problem.

[FurryNutz]

Thank you sir. I'll add this to the bug list.
Was SmartConnect enabled when you were testing wireless?
Does wired connections experience the same thing?
Did you load the official release and not the beta?

Not sure if I should be posting this here or a separate thread, but there's a serious issue with this firmware.
I've got a Canadian unit which uses the same 1.07 (did a binary comparison of the US and Canadian firmware, identical) and when using this firmware, most of my devices have very high latency. Basically making using the devices over wifi unusable. I've tried it with multiple devices (Nexus 6p, HTC One M9, One A9, DAP-1650, etc) and running speed tests I see the ping time (30+ms) and even locating the nearest server takes a really long time. The only devices that operate ok are my iPhone 6s Plus, no idea why, but everything else lags to heck.  I know it's the router as I have two other AC routers (backup routers) that I tested with the same devices and they work flawlessly (sub 10ms pings and no latency whatsoever).

I was able to rectify this issue by flashing down to v1.06 for the DIR-880l and now all those afflicted devices run as normal, so I am using that version for now.  I have contacted D-link support and provided all this information, but wanted to post here as well just in case it can get to their Engineers more directly, there's obviously a bug that was introduced in 1.07 that is causing this high latency problem.