D-Link Forums

The Graveyard - Products No Longer Supported => Routers / COVR => WBR-2310 => Topic started by: Chadwickr on February 27, 2016, 06:27:27 PM

Title: EBR-2310 Port forwarding issues
Post by: Chadwickr on February 27, 2016, 06:27:27 PM

My port forwarding won't work! I've tried to do it so many times, and it worked a few times in the beginning, a few years ago (I think). But now I can't port forward any game. I've tried a virtual server as well, but no luck. Anything helps.

DMZ is off
Enable SPI is on

Picture of my port forwarding setup. Have I done something wrong? My friend says he can't connect, and the port forwarding application I downloaded says the port is connectable or "open" when I run it.
https://gyazo.com/c026fb547d4daac65d81bdd4be44b4e7

Help?

Title: Re: EBR-2310 Port forwarding issues
Post by: FurryNutz on February 28, 2016, 10:16:30 AM

Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)

• What Hardware version is your router? Look at sticker under the router case.
• Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded? Found on the routers web page under status.
• What region are you located?

Internet Service Provider and Modem Configurations

• What ISP Service do you have? Cable or DSL?
• What ISP Modem Mfr. and model # do you have?

Router and Wired Configurations
Some things to try: - Log into the routers web page at 192.168.0.1. Use IE, Opera or FF to manage the router. Besure to log into the Admin account on the router.

• Turn off TrueGigaBit Routing (http://forums.dlink.com/index.php?topic=60699.0) under Setup/Internet/Manual for those routers that have this feature for testing.
• Turn off ALL QoS (http://vonage.nmhoy.net/qos.html) or Disable Traffic Shaping (DIR only) GameFuel (DGL only and if ON.) options, Advanced/QoS (http://en.wikipedia.org/wiki/Quality_of_service) or Gamefuel. For the DGL-5500, review this for Streamboost information and settings: Furry's DGL-5500 Review (http://forums.dlink.com/index.php?topic=55136.0)
• Turn off Advanced DNS Services if you have this option under Setup/Internet/Manual or under Setup/PARENTAL CONTROL/Set to>None: Static IP or Obtain Automatically From ISP.
• Enable or Disable Use Unicasting (compatibility for some ISP DHCP Servers) and test under Setup/Internet/Manual. Disable may help with speed performance on higher speed ISP services.
• Turn on or off DNS Relay (http://forums.dlink.com/index.php?topic=45143.0) under Setup/Networking. Link>Finding Faster DNS Addresses using Name Bench (http://forums.dlink.com/index.php?topic=53222.0) and input new DNS addresses under Setup/Internet/Manual.
• Setup DHCP (http://forums.dlink.com/index.php?topic=58017.0) reserved IP addresses for all devices ON the router. Setup/Networking. This ensures each devices gets its own IP address when turned on and connected, eliminates IP address conflicts and helps in troubleshooting and maintain consistency for applications that need to connect as well as mapped drives.
• Ensure devices are set to auto obtain an IP address.
• Set Firewall settings to Endpoint Independent for TCP and UDP under Advanced/Firewall. Enable or Disable SPI (http://en.wikipedia.org/wiki/SPI) to test.
• Enable uPnP (http://en.wikipedia.org/wiki/Upnp) and Multi-cast Streaming (http://en.wikipedia.org/wiki/Multicast) under Advanced/Networking. Disable uPnP for testing Port Forwarding (http://forums.dlink.com/index.php?topic=4235.0) rules.