D-Link Forums
The Graveyard - Products No Longer Supported => IP Cameras => DCS-825L => Topic started by: JavaLawyer on January 07, 2014, 06:22:52 AM
-
D-Link released firmware version 1.01b3327 for the DCS-825L. Please log into your DCS-825L to upload this latest version to your camera.
Please post your comments and observations as a reply to this thread. :) ;) :)
-
Release Notes - Firmware v1.01b3327 - Date: 11/29/2013
- [New Feature] Support Windows format size SD card
- [New Feature] Support SD card with multi-partitions
- [New Feature] Support following two behaviors while rebooting: (1) Light on the thermal LED in Blue/Green/Red colors for 0.5 seconds, respectively; and (2) Play the boot up music if it’s enabled
- [New Feature] Support display following items on Device Info web-page: (1) MAC address both for AP router and AP client; and (2) Current wireless channel both for AP router and AP client
- [New Feature] Speed up following processes. (work with v1.02 App): (1) Boot up process for setup wizard; (2) Change user password; (3) Set date and time; and (4) Set wireless configuration
- [New Feature] Enable NTP sync function with server “ntp1.dlink.com” as default
- [New Feature] Upgrade mydlink agent to v2.0.17-b43
DCS-825L - Cumulative Firmware Release Notes (http://forums.dlink.com/index.php?topic=57313.0)
-
Could you please provide a link to this firmware update along with instruction on how to do it? I have tried google and nearly everything comes back to this site. I have also tried to get the software for my Mac but as the camera is no longer listed on the AU D-Link website, I am unable to do it.
Any assistance would be gratefully accepted.
Thank you.
-
Could you please provide a link to this firmware update along with instruction on how to do it? I have tried google and nearly everything comes back to this site. I have also tried to get the software for my Mac but as the camera is no longer listed on the AU D-Link website, I am unable to do it.
Any assistance would be gratefully accepted.
Thank you.
Firmware updates are performed from the mydlink Baby Camera Monitor Mobile App
-
Firmware updates are performed from the mydlink Baby Camera Monitor Mobile App
The android app does not have any option to upgrade the firmware. I am not sure about the ipad though. I upgraded my camera via the mydlink site.
If you press the ? in the top right of the android app, on the screen where you are monitoring your camera but not actually viewing, there is some info in there about firmware upgrades. At the bottom of page 3 through to page 8 How do I upgrade firmware which shows you how to do this from a windows pc or mac using xxx.xxx.xxx.xxx/eng/admin/tools_firmware.cgi. It fails to mention that you should be using admin for the username and the password you have set for your device at initial set up. Initially having found this hyperlink in the faqs on the dlink site I was a bit wary of it but I guess as it is mentioned in the android app for this specific camera it should be ok to use, maybe. Anyone done it this way yet?
-
To upgrade firmware you have to setup your camera to connect on your private Wifi network.
Then create a dlink account and register this camera to your dlink account.
Now try to use this camera from dlink web site logged in with your account, update should be proceed.
About new firmware:
- no more admin options
- always detection problem from Dlink Babycamera application on Android
Android application still bad and spent lot of time to wait... :-(
-
Has this firmware update corrected the issues with the push notifications not working on Apple products???
-
Has this firmware update corrected the issues with the push notifications not working on Apple products???
Sorry but not an Apple user.
But on Android notifications are not working anymore :-(
-
Please see the following FAQ post for instructions describing how to upgrade DCS-825L firmware:
DCS-825L - How to Upgrade Firmware (http://forums.dlink.com/index.php?topic=57601.0)