• December 07, 2021, 11:47:26 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: MultiSSID stops broadcasting when put on schedule  (Read 5883 times)

SUPERLID20

  • Level 1 Member
  • *
  • Posts: 2
MultiSSID stops broadcasting when put on schedule
« on: June 01, 2017, 05:06:08 AM »

Anyone have experience With this ?

I have enabled Multi-SSID on my access point, and all of them broadcast themself. Once i try to set a schedule on them they stop broadcasting.
I gave the schedule a name , choose the correct index and verified that the correct SSID shows up. I select the right day and even if i choose All Day(s) or enten correct time slot the SSID does not broadcast.

If i remove the Schedule , it starts broadcasting again.

I have checked that the time/date on the ap is correct.


Logged

SUPERLID20

  • Level 1 Member
  • *
  • Posts: 2
Re: MultiSSID stops broadcasting when put on schedule
« Reply #1 on: June 02, 2017, 04:33:38 AM »

Some extra information. This happens running 1.20 firmware. After downgrading to 1.17 the problem is not longer there!
Logged

Gattsu

  • Technical Engineer
  • Level 3 Member
  • *
  • Posts: 139
Re: MultiSSID stops broadcasting when put on schedule
« Reply #2 on: June 02, 2017, 07:34:18 AM »

Just tested this in my lab. Not seeing the issue.

My steps:
-Factory reset and updated firmware to 1.20.
-enabled MultiSSID
-Created 5 and 2.4 ghz SSIDs on the primary.
-Enabled and Set a schedule for 2.4 and 5.0.

Before retesting, make sure to factory reset and re-configure only these settings.
Logged