• April 27, 2024, 03:36:24 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: how to configure internet connection on the WAN1.  (Read 7448 times)

battulga

  • Level 1 Member
  • *
  • Posts: 4
how to configure internet connection on the WAN1.
« on: August 10, 2009, 08:43:18 PM »

How to configure DFL 800 setting ?
I can't connect to internet. how to configure internet connection on the WAN1.

Please help me ? :(
Logged

NovaE

  • Level 1 Member
  • *
  • Posts: 20
Re: how to configure internet connection on the WAN1.
« Reply #1 on: August 10, 2009, 09:21:57 PM »

What type of connection are you trying to configure on WAN1. ?
Logged

battulga

  • Level 1 Member
  • *
  • Posts: 4
Re: how to configure internet connection on the WAN1.
« Reply #2 on: August 10, 2009, 11:49:33 PM »

Static IP. from ISP give me some IP.  how to configure  from wan1 to lan network write rule ?
Logged

NovaE

  • Level 1 Member
  • *
  • Posts: 20
Re: how to configure internet connection on the WAN1.
« Reply #3 on: August 11, 2009, 12:25:23 AM »

Configure your objects firstly with the details from the ISP.

Wan1_IP = static IP supplied.
Wan1_GW = Supplied. (usually this will be in most cases 1 below your static.). eg, IP=192.168.1.2--gw - 192.168.1.1
Wan1_DNS = Supplied by ISP.

Rules for outgoing traffic would be.

1  drop_smb-all  Drop  lan  lannet  wan1  all-nets  smb-all
2  allow_ping-outbound  NAT  lan  lannet  wan1  all-nets  ping-outbound
3  allow_ftp-passthrough  NAT  lan  lannet  wan1  all-nets  ftp-passthrough
4  allow_standard  NAT  lan  lannet  wan1  all-nets  all_tcpudp

Hope this helps a little. This is the basic table defaulting on the DFL.

Logged

battulga

  • Level 1 Member
  • *
  • Posts: 4
Re: how to configure internet connection on the WAN1.
« Reply #4 on: August 11, 2009, 01:34:42 AM »

Tnx for reply to me . But i tring to it. it is not connect to my server(win server2003). There working DHCP server and DNS server and Active Director . Why not connetced is it ?.
Logged

NovaE

  • Level 1 Member
  • *
  • Posts: 20
Re: how to configure internet connection on the WAN1.
« Reply #5 on: August 11, 2009, 05:20:39 PM »

In your server setup. Have you got the Router's IP setup in the DHCP ?

Also, When you say not connecting to your server. Do you mean from the outside you cant. Or You cannot connect to the internet from the server ?
Logged

Ricky_swe

  • Level 1 Member
  • *
  • Posts: 13
Re: how to configure internet connection on the WAN1.
« Reply #6 on: August 14, 2009, 06:47:16 AM »

Ive got the same problem have static IP from ISP got the same basic rules the only thing i can do outside the network is ping ISP's GW then its all dead.
Logged

Fatman

  • Level 9 Member
  • ****
  • Posts: 1675
Re: how to configure internet connection on the WAN1.
« Reply #7 on: August 14, 2009, 03:18:11 PM »

Check your WAN GW.
Logged
non progredi est regredi

Ricky_swe

  • Level 1 Member
  • *
  • Posts: 13
Re: how to configure internet connection on the WAN1.
« Reply #8 on: August 17, 2009, 12:50:43 AM »

Hi fatman if you replyed to me ive checked GW_IP and its ok and i also can ping so far but not any further.
Logged

Fatman

  • Level 9 Member
  • ****
  • Posts: 1675
Re: how to configure internet connection on the WAN1.
« Reply #9 on: August 17, 2009, 08:24:12 AM »

In another thread you indicate you found your issues with getting outbound traffic working, is that so for this thread too Ricky_swe?
Logged
non progredi est regredi

Ricky_swe

  • Level 1 Member
  • *
  • Posts: 13
Re: how to configure internet connection on the WAN1.
« Reply #10 on: August 17, 2009, 11:37:50 PM »

Hi Fatman yes when i did a factoryreset and a new config in another net i got it working flawless.
Logged