• March 28, 2024, 08:10:01 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Pages: [1] 2

Author Topic: DCS-2132L-ES  (Read 29421 times)

Thadiusdog

  • Level 1 Member
  • *
  • Posts: 9
DCS-2132L-ES
« on: September 12, 2016, 12:26:58 PM »

Greetings,
I have a DCS-2132L-ES which came with a SAGE home automation kit.
The company decided to discontinue the SAGE.
I'd like to use the camera in a Samsung Smart Thing set up but it doesn't pair.
I bought a DCS-2132L and it works great.
I figure it's just a F/W issue with the ES camera.
I called tech support and they were no help.
Tried to update/upgrade/change the FW and it says "Firmware is corrupted"
I can ssh into the camera and see the filesystem.
Not really sure what to do?  Any thoughts on how I might flash the standard FW to it?
Current FW is 1.00-ES.12

Thanks in advance!
Ed
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DCS-2132L-ES
« Reply #1 on: September 12, 2016, 01:40:04 PM »

Link>Welcome!

  • What region are you located?

Not sure if OEM FW can be put on this model camera since it was a package with this SAGE system. There are differences in HW. Sorry,

« Last Edit: September 12, 2016, 01:56:56 PM by FurryNutz »
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

Thadiusdog

  • Level 1 Member
  • *
  • Posts: 9
Re: DCS-2132L-ES
« Reply #2 on: September 19, 2016, 09:34:59 AM »

Thanks for the reply FurryNutz....I got the camera working....had to cross compile the source
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DCS-2132L-ES
« Reply #3 on: September 19, 2016, 09:37:13 AM »

AH, glad you had the knowledge to do that. Not everyone has that.

Enjoy.  ;)
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

bdkempe

  • Level 1 Member
  • *
  • Posts: 1
Re: DCS-2132L-ES
« Reply #4 on: September 28, 2016, 12:18:26 PM »

Would you be able to send that to me so I can do the same? Thanks
Logged

miscbookreader

  • Level 1 Member
  • *
  • Posts: 1
Re: DCS-2132L-ES
« Reply #5 on: November 13, 2016, 05:20:18 PM »

Thanks for the reply FurryNutz....I got the camera working....had to cross compile the source

Hi Thadius - I have the same camera from SAGE, can you help me with you build? Appreciate your help.
Logged

RYAT3

  • Level 10 Member
  • *****
  • Posts: 2254
Re: DCS-2132L-ES
« Reply #6 on: November 13, 2016, 09:11:35 PM »

Logged

RYAT3

  • Level 10 Member
  • *****
  • Posts: 2254
Re: DCS-2132L-ES
« Reply #7 on: November 13, 2016, 09:11:53 PM »

Thanks for the reply FurryNutz....I got the camera working....had to cross compile the source

Hi Thadius - I have the same camera from SAGE, can you help me with you build? Appreciate your help.

Try here:

http://forums.dlink.com/index.php?topic=65610.msg273835#msg273835
Logged

Thadiusdog

  • Level 1 Member
  • *
  • Posts: 9
Re: DCS-2132L-ES
« Reply #8 on: November 14, 2016, 10:19:10 AM »

Greetings All,
Sorry for not replying sooner...I've gotten inundated with other projects.
I'll pull out one of these cameras when I get a chance and post something when I have something useful. 
Ed
Logged

raf1919

  • Level 1 Member
  • *
  • Posts: 2
Re: DCS-2132L-ES
« Reply #9 on: December 23, 2016, 03:53:12 PM »

Thanks for the reply FurryNutz....I got the camera working....had to cross compile the source

How did you do that?  I am having same issue I got the ES camera without realizing that its different and can't get it work via app, or can't even get into GUI.  I tried the restore where i put firmware on sd and held reset on power and no luck.
Logged

frbaker

  • Level 1 Member
  • *
  • Posts: 1
Re: DCS-2132L-ES
« Reply #10 on: January 17, 2017, 02:00:09 PM »

I also have the Sage DCS-2132L-ES camera and can't upgrade the firmware from dlink and of course can't get it to work in the Dlink app.

Is the recompiled firmware "fix" available for download?

Thank you very much in advance. 

Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DCS-2132L-ES
« Reply #11 on: January 17, 2017, 03:21:30 PM »

I would PM Thadiusdog. He's still around.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

nomadweb.design

  • Level 1 Member
  • *
  • Posts: 6
Re: DCS-2132L-ES
« Reply #12 on: March 18, 2022, 12:52:24 PM »

Hello, I bought several new in box DCS-2132L-ES not knowing they were with Sage. Anyways, from what I've read I understand it is possible to access the web gui by the cameras IP address. I am very familiar with this process and was what I was intending anyway. I can see the cameras IP adress of 192.168.1.100 however I can not pull up the interface. I've been trying for about 3 hours now with everything I can think of. I read there could be something with a location firewall in this particular model. I even tried to change the firmware but that did not work.

My question: Is there anyway in 2022 to make a DCS-2132L-ES work at all? Is there some info on how to manually flash? I tried putting the upgrade.bin on the microsd card but that did not seem to work.

Thanks for your help, I bought 5 of these new on eBay and debating if I need to do a return.

Thank you!
- Andrew

Logged

Thadiusdog

  • Level 1 Member
  • *
  • Posts: 9
Re: DCS-2132L-ES
« Reply #13 on: March 18, 2022, 10:06:20 PM »

Just in case anybody is still working with these cameras.

Here's some notes on how to work with the camera.

Web Access:

1)     Allow camera to connect via DHCP to network
2)     Grab MAC address from back of camera
3)     Run:  arp –a    to find out mac to IP correlation
4)     Once IP found use https://<ip address> in web browser
5)   NOTE:  I think you can reset the camera with the reset hole in the back ( use a paper clip)

Default login: admin
Password: is blank.

To load the  firmware on the camera.  This can be done in 2 ways.

SD Card

1)     Put the FW on a micro SD card in “upgrade” directory.  Must be formatted as FAT32
2)      Put the SD card in the camera  with no power
3)     Hold the reset pin while plugging the camera power
4)     Hold for about 20 seconds then let go
5)     LED should flash while in the process of loading firmware
6)     Will turn green once finished… usually about 2 minutes

Web Gui

1)     Navigate around in the web gui and find where to update the Firmware
2)     You should be able to browse on your computer to find the right firwmare ( this is the file I sent)
3)     Then click upgrade button … will take about 2 minutes and LED will turn green on front
4)     This method will work but since it’s done over the network its not as reliable
Logged

nomadweb.design

  • Level 1 Member
  • *
  • Posts: 6
Re: DCS-2132L-ES
« Reply #14 on: March 19, 2022, 06:26:57 AM »

Can you explain the mac and arp -a command? Would that show a different IP address other than what is showing up on the Network screen in windows? Also, for the firmware, I've tried several versions but none seem to work except the ES version which still doesn't allow me to access the web interface. I've read there could be a firewall in these preventing USA access, were these only sold in the UK and that is why they work for some users and not others?

Seriously, this should not be that hard but I think something is blocking them. I bought 5 brand new in package on eBay not knowing they were special for Sage etc. I've been setting up IP cameras for 15 years doing the port forwarding and the whole 9 yards. This is a new hurdle for me.
Logged
Pages: [1] 2