Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[alex.x]

A Few of questions.

1) does the unit complete the boot sequence?
2) do the fans start running at startup?
3) have you tried another power supply? (the 19v 4.74A supply for a laptop computer will work)

1) the boost sequence seem to be complete.
2) yes fans a running at startup then stop after. (I also try without hdd)
3) a other power supply  I didnt think about that i ll check voltage and ampère

[ivan]

When you check the power supply make sure you do under load.  A failing switch mode power supply will most probably show the correct voltage without load but will not be able to do that under load.

[FurryNutz]

Any status on this? 

A Few of questions.

1) does the unit complete the boot sequence?
2) do the fans start running at startup?
3) have you tried another power supply? (the 19v 4.74A supply for a laptop computer will work)

1) the boost sequence seem to be complete.
2) yes fans a running at startup then stop after. (I also try without hdd)
3) a other power supply  I didnt think about that i ll check voltage and ampère

[alex.x]

Hi

I don't  testing yet with power supply  19V 4,74a
I don't have one I can use yet
I ll let u know as soon as possible

[alex.x]

 Hi there,  i am back...

 so.. I finally try with another power supply ( 19v 150w and 7.5a) it did not change a thing


there is always "Network is disconnected"


EDIT:
i was thinking about something there is a supply battery CR2032  can it be the problem ?

[FurryNutz]

Any status on this?

I don't think the internal battery would effect network disconnect.

[alex.x]

Any status on this?

I don't think the internal battery would effect network disconnect.

Status is still same.

[FurryNutz]

My try the DNS at a different location or with a different router, PC or switch and see if the problem continues. IF it does, then there maybe something going bad on the DNS.

[alex.x]

I already try with an other router
I did try to reset fews month ago too but since than  he ip on panel stay 192.168.0.32 it never change.

Sorry for my very wrong english

[FurryNutz]

Can you log into the DNS at .32?

[alex.x]

No  he s not know by the router is like it doesn't  exist
And these is no led of actif device on RJ45 port panel
Ip router: 192.168.0.1
Ip pc1: 192.168.0.199

Ip dlink on this panel 192.168.0.32
But always with message " caution network is disconnected"

[FurryNutz]

I can only presume that the DNS connection is bad on the unit. Or something has happened to the unit.