D-Link Forums

The Graveyard - Products No Longer Supported => IP Cameras => DCS-2132L => Topic started by: nmadole on May 15, 2014, 05:06:04 PM

Title: DNR-202L Cannot Find 2132LB1
Post by: nmadole on May 15, 2014, 05:06:04 PM
Added a new camera today. DCS-2132LB1

It is attached to the network (wireless) and has been set-up. It shows up in the MyDlink.com "My Device" tab.
It shows as attached to the router under the router admin page.
It will not show up when I search for new camera's on the DNR-202L administration page (via IP address)
Only the existing camera's shows up when I search (already connected).

Any idea's?
Title: Re: DNR-202L Cannot Find 2132L1
Post by: superbowl98 on December 02, 2016, 10:01:49 PM
I just purchased a DNR 202L and am having the same issues with my B hardware version 2132L.  The firmware on it (1.01ES.10) will not update to the current for that model.

appreciate any help, I just joined today!
Title: Re: DNR-202L Cannot Find 2132LB1
Post by: BAMoh on December 02, 2016, 10:33:54 PM
Not familiar with your cam. Is it listed as a supported model? Having asked that, I do think the DNR is supposed to support all models. Try repeated searches? Put it on LAN cable and see if it shows up?
Title: Re: DNR-202L Cannot Find 2132L1
Post by: FurryNutz on December 03, 2016, 10:00:20 AM
Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)


What Mfr and model is the main host router?
What FW is loaded on the DNR-202L?


I just purchased a DNR 202L and am having the same issues with my B hardware version 2132L.  The firmware on it (1.01ES.10) will not update to the current for that model.

appreciate any help, I just joined today!
Title: Re: DNR-202L Cannot Find 2132LB1
Post by: superbowl98 on December 08, 2016, 12:19:31 PM
Thanks for the replies, I will check the MFR and firmware on the 202L
The router is a Netgear, I have static IPs set for the 202L and each camera.
Title: Re: DNR-202L Cannot Find 2132LB1
Post by: FurryNutz on December 08, 2016, 12:23:11 PM
What region are you located?

I use a static IP address of 192.168.0.202 which is out side of my main host routers DHCP IP address pool on my DNR-202L. I'm using v2.04 FW on it.