D-Link Forums
The Graveyard - Products No Longer Supported => IP Cameras => DCS-5222L => Topic started by: mailming on July 02, 2012, 06:19:46 PM
-
"
start the firmware upgrade.
The upload image is damaged"
error message above, my firmeware version is 1.00
-
"
start the firmware upgrade.
The upload image is damaged"
error message above, my firmeware version is 1.00
Did you unzip the firmware archive you downloaded before trying to install?
-
Of course, using xxx.bin file to upgrade.
everytime around 10-20% upload, the camera seems to reset and start rotating the camera and couple seconds after, it will show the error.
I tried two different 5222l, same result.
-
I had to ask that question. . . you'd be surprised how many users try to upload the archived file.
Where did you download the firmware from?
-
http://d2okd4tdjucp2n.cloudfront.net/update_DCS-5211L_DCS-5222L_1.01_1522_DI.bin.zip
in the dlink support page.
https://www.mydlink.com/support
Pick DCS-5222L
-
Although the zip file unpacked properly, did you try re-downloading the file?
Have any other DCS-5222L owners experienced issues uploading the latest firmware from mydlink.com/support? ???
-
I tried twice, using Windows 7 64bits + Internet Explorer and Firefox.
-
I'll need validation/replication from at least one or two other DCS-5222L owners before I can escalate this to D-Link.
Has anyone else experienced issues updating this firmware update?
-
Yes I have the exact same proble
-
same issue here
-
Thank you for the update. I will notify D-Link of this issue. ;)
-
I am also unable to update to 1.01. It uploads to about 14% and then the camera resets. Otherwise I am really impressed with the camera. It is great and a big improvement over the 932L.
same issue here
-
Have you had any success trying to install the firmware? I reported the issue to D-Link a week ago. ???
-
Have you had any success trying to install the firmware? I reported the issue to D-Link a week ago. ???
Nope, still same file there online. no change.
-
Looks like now is working
do you have a list of changes on this ver?
-
Looks like now is working
do you have a list of changes on this ver?
No change log was published for this version.