Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[onyxeng]

I want to be able to VPN into the device as User X and only be able to access VLAN 1  If USER Y Logs in that person should have access to VLAN 2.  Is this possible with the DFL210?

From what I have read in the forums, the switch on the device is unmanaged, therefore I would need to plug this into my managed switch to actually use the VLANs which is ok.

[Fatman]

You would need a managed switch to handle the VLANs.

Give the users a static PPP IP under their user account and create IP rules that allow traffic from that IP to the nets they should be able to access.

[onyxeng]

Not a problem with the managed switch, but if the user were to change his IP address once connected would they then have access to the other network?

Example
Network 1 - 192.168.0.xxx
Network 2 - 10.0.0.xxx

USER 1 is static IP 192.168.0.200
USER 2 is static IP 10.0.0.1
if user 1 logged in and changed his IP from DHCP to a static IP on the 10.0.0.x network would he then have access to it?

[danilovav]

We are talking about PPP (PPTP/L2TP) server, right?

If you set static IP for some user, it's impossible to change it.

So, by settings address for user you can be sure that this user will have only allowed access.