D-Link Forums
The Graveyard - Products No Longer Supported => D-Link NetDefend Firewalls => Topic started by: gouster4 on July 03, 2017, 03:07:10 PM
-
Hi. I have DFL-210 and i need to have two wan ports. So i decided to use DMZ port as WAN2 port.
I have renamed dmz interface to wan2, created ip rules same as lan_to_wan, but for wan2.
But when i connect my router to DMZ port, i have no internet acess from lan. i can ping router connected from wan2, but i cant acess internet. i have dhcp client enabled, and default gw seems to be right.
Is there something more that i need set up to get it working?
Thanx.
EDIT: I have it, it seems that problem was in wan2 interface Route metric. it should not be same as wan (1) Route metric. So i changed it from 100 to 80.
-
Review this and see if anything helps. The post didn't return to confirm anything...
http://forums.dlink.com/index.php?topic=66682.0 (http://forums.dlink.com/index.php?topic=66682.0)
-
Thanx. Problem was in Route metric. I had it same on wan (1) and wan2.
So final solution is just to change DMZ Route metric to 80, then create ip rules same as lan_to_wan, but for dmz instead of wan. I had renamed dmz interface to wan2, but i think that does not have anything to do with it.
-
Nice. Thanks for confirming this. Enjoy.
;)