Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[FurryNutz]

You should be able to set new uplink speeds now...

I tested this firmware and it works.  But the problem that I have is that my FIOS is 60Mbps/60Mbps.  And turning on this feature drops my upload speed to ~20Mbps (limit of this firmware parameter).

[SpecTP]

You should be able to set new uplink speeds now...

I tested this firmware and it works.  But the problem that I have is that my FIOS is 60Mbps/60Mbps.  And turning on this feature drops my upload speed to ~20Mbps (limit of this firmware parameter).

how can I do this?  the manual uplink option only allows me to set values between 20kbps and 2Mbps

[FurryNutz]

If you loaded the modded FW, you should be able to enter values above 2Mb now...

[FurryNutz]

DIR-655 Rev B v2.11 mod
DNS Relay Disabled.
QoS preset for 3072Mb Uplink.
Rule set for priority 128(Normal) with Mac Book Pro LAN wired to the router and in the rule. ANY Protocol.

ISP:
Last Result:
Download Speed: 102424 kbps (12803 KB/sec transfer rate)
Upload Speed: 2993 kbps (374.1 KB/sec transfer rate)
Latency: 13 ms
Jitter: 5 ms
July 11, 2016 at 6:26:05 PM MDT

SPeedtest.net


Ping test with upload from email using Thunderbird: 20Mb file upload
PING 192.168.0.1 (192.168.0.1): 56 data bytes
64 bytes from 192.168.0.1: icmp_seq=0 ttl=64 time=0.343 ms
64 bytes from 192.168.0.1: icmp_seq=1 ttl=64 time=0.422 ms
64 bytes from 192.168.0.1: icmp_seq=2 ttl=64 time=0.550 ms
64 bytes from 192.168.0.1: icmp_seq=3 ttl=64 time=0.533 ms
64 bytes from 192.168.0.1: icmp_seq=4 ttl=64 time=0.633 ms
64 bytes from 192.168.0.1: icmp_seq=5 ttl=64 time=0.452 ms
64 bytes from 192.168.0.1: icmp_seq=6 ttl=64 time=0.569 ms
64 bytes from 192.168.0.1: icmp_seq=7 ttl=64 time=0.532 ms
64 bytes from 192.168.0.1: icmp_seq=8 ttl=64 time=0.482 ms
64 bytes from 192.168.0.1: icmp_seq=9 ttl=64 time=0.385 ms
64 bytes from 192.168.0.1: icmp_seq=10 ttl=64 time=0.430 ms
64 bytes from 192.168.0.1: icmp_seq=11 ttl=64 time=0.526 ms
64 bytes from 192.168.0.1: icmp_seq=12 ttl=64 time=0.462 ms
64 bytes from 192.168.0.1: icmp_seq=13 ttl=64 time=0.487 ms
64 bytes from 192.168.0.1: icmp_seq=14 ttl=64 time=0.329 ms
64 bytes from 192.168.0.1: icmp_seq=15 ttl=64 time=0.334 ms
64 bytes from 192.168.0.1: icmp_seq=16 ttl=64 time=0.553 ms
64 bytes from 192.168.0.1: icmp_seq=17 ttl=64 time=0.514 ms
64 bytes from 192.168.0.1: icmp_seq=18 ttl=64 time=0.550 ms
64 bytes from 192.168.0.1: icmp_seq=19 ttl=64 time=0.501 ms
64 bytes from 192.168.0.1: icmp_seq=20 ttl=64 time=0.397 ms
64 bytes from 192.168.0.1: icmp_seq=21 ttl=64 time=0.374 ms
64 bytes from 192.168.0.1: icmp_seq=22 ttl=64 time=0.313 ms
64 bytes from 192.168.0.1: icmp_seq=23 ttl=64 time=0.374 ms
64 bytes from 192.168.0.1: icmp_seq=24 ttl=64 time=0.357 ms
64 bytes from 192.168.0.1: icmp_seq=25 ttl=64 time=0.364 ms
64 bytes from 192.168.0.1: icmp_seq=26 ttl=64 time=0.358 ms
64 bytes from 192.168.0.1: icmp_seq=27 ttl=64 time=0.307 ms
64 bytes from 192.168.0.1: icmp_seq=28 ttl=64 time=0.424 ms
64 bytes from 192.168.0.1: icmp_seq=29 ttl=64 time=0.522 ms

After initial testing was done, I connected the rest of the network devices along with 2 XB1s and set up QoS for Both, Reserved IPs, Ports 0 thru 65535, BOTH UDP and TCP Protocol, Remote IP from 0.0.0.0 to 255.255.255.255 with uPnP enabled and Firewall SPI disabled and Endpoint Independent. Both XB1s have OPEN NAT on the Dashboard and BO3. Gaming was good in BO3 with both consoles gaming last nite.

[IMRJS]

Ok just tried this on my old DIR-857... Downloaded the firmware from shm0 first post on Google Drive just a few questions.
1. Is this based off 1.04B09Beta03 with the UPNP Vulnerability fix?
2. Is what I downloaded the newest version of the Mod?

I just noticed on my status page I have Firmware Version :1.04 , 27, Jun, 2013. However the date for 1.04B09Beta03 is 11/20/14?

Thank for making this! So far the upload is working I'm getting my full 10mb UL.

Ryan

[FurryNutz]

Yes.
There was only 1 mod done and that was it.

Ok just tried this on my old DIR-857... Downloaded the firmware from shm0 first post on Google Drive just a few questions.
1. Is this based off 1.04B09Beta03 with the UPNP Vulnerability fix?
2. Is what I downloaded the newest version of the Mod?

I just noticed on my status page I have Firmware Version :1.04 , 27, Jun, 2013. However the date for 1.04B09Beta03 is 11/20/14?

Thank for making this! So far the upload is working I'm getting my full 10mb UL.

Ryan

[vore82]

hey dude how are you ? can you tell me please which is the best conf if i have 200mb/200mb of intenet speed

[FurryNutz]

Link>Welcome!

• What Hardware version is your router? Look at sticker under the router case.
• Link>What Firmware version is currently loaded? Found on the routers web page under status.
• What region are you located?

Internet Service Provider and Modem Configurations

• What ISP Service do you have? Cable or DSL?
• What ISP Modem Mfr. and model # do you have?

Are you trying to configure QoS?
What are you doing? Gaming or video streaming?
Are you the only one doing something with the router or are there other devices involved as well?

[vore82]

hi . i have the modded version 1.04 dlink 857 i have cable speed 200b/200mb axtel provider , i use it for gaming , gaming center with 25 computer exclusively for online gaming im using a switch gigabit tplink sg1024 model

[FurryNutz]

What region are you located?

Ya not sure if this model router will be good for 25 dedicated gaming PCs.

You can try setting the uplink to 204800 and see if this value is accepted. Not sure if it will be. This model router never supported any uplink speeds over 2Mb and the mod FW was to uncap that limit and not sure if anything over 50Mb or 100Mb will be usable by QoS.

[Syaoran]

What region are you located?

Ya not sure if this model router will be good for 25 dedicated gaming PCs.

I'm going to say they would be lucky to get 5.    This router is incredibly dated, under powered, and has been since the day it was released.  Have fun trying though. 

[vore82]

im from mexico city

[FurryNutz]

Actually the router was a good router for its time and it's design. I was using this router with well over 5 devices and even did some stress test video streaming with it. Aside the heat sink issue. This router is a good router. Still is!

What region are you located?

Ya not sure if this model router will be good for 25 dedicated gaming PCs.

I'm going to say they would be lucky to get 5.    This router is incredibly dated, under powered, and has been since the day it was released.  Have fun trying though.

[FurryNutz]

Do you get ISP sped speeds when testing for speeds?

I think this router maybe good for some gaming. All depends on what your doing and games your playing and bandwidth.

Can give the QoS configuration a try. However again, this router may not be able to handle that kind of work load with 25 gaming PCs and ISP bandwidth in its QoS. 

im from mexico city

[Syaoran]

Actually the router was a good router for its time and it's design. I was using this router with well over 5 devices and even did some stress test video streaming with it. Aside the heat sink issue. This router is a good router. Still is!

What region are you located?

Ya not sure if this model router will be good for 25 dedicated gaming PCs.

I'm going to say they would be lucky to get 5.    This router is incredibly dated, under powered, and has been since the day it was released.  Have fun trying though.

I would say that is only true with the mod.  Things have changed a lot and gaming demands as well as streaming in 4k would easily choke this router out on multiple computers.  The heatsink should definitely be added if the person is going to stress this router even in the slightest.