D-Link Forums
The Graveyard - Products No Longer Supported => D-Link Storage => DNS-343 => Topic started by: angusmac on April 04, 2010, 05:15:45 AM
-
Hi All,
Hoping you can help.
Brand new DNS-343.
2 x 1Tb drives set up on JBOD - approx 50% full. 1 x 1Tb drive as a separate volume - about 5% full. Running firmware 1.03. No dhcp. Static IP addresses set.
Streaming content through a PS3 and having a few issues. All files set in subdirectories not in the root folder. Everything connected by ethernet cable (as opposed to wireless).
First - and I gather this is a known issue - the uPNP doesn't seem to transmit the existence of mp4/avi files. Very highly annoying.
Second - occasionally during streaming I get a DLNA error 2104 error showing up which causes the system to sieze. The only way to get rid of it seems to be to reboot the system.
From research should I:
a) Reset the firmware to 1.2
b) Accept the limitations of the DLink uPNP and get Mediatomb or similar installed
c) Other?
Your thoughts appreciated.
Cheers
-
Yes, this is a known issue and from what I was told it will be fixed in the next firmware release.
I am using Mediatomb to allow the MP4 functionality to stream to my PS3 until the firmware is released.
If you do a search in the forum on this issue, you will see my thread.
-
Yes, this is a known issue and from what I was told it will be fixed in the next firmware release.
I am using Mediatomb to allow the MP4 functionality to stream to my PS3 until the firmware is released.
If you do a search in the forum on this issue, you will see my thread.
Thanks Smyle.
I was tending in that direction but was concerned that installing the funplug apparently invalidates warranty etc. I was also concerned about the 2104 error as I haven't been able to find a lot of information on this, what exactly it was caused by and / or how to fix it. Before I took the plunge with Mediatomb I wanted to make sure that it was actually the solution.
Cheers