• March 28, 2024, 07:35:11 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DCS920: SMTP settings: Can't send mail  (Read 9420 times)

penang-mushroom

  • Level 1 Member
  • *
  • Posts: 2
DCS920: SMTP settings: Can't send mail
« on: February 23, 2010, 06:52:44 PM »

I need to seek help from the export here.

I'm facing a problem in configuring email setting in DCS 920. I'm using GMail account as below:
server: smtp.gmail.com
port: 587

However, I couldn't find any place in the DCS920 settings to enable TLS or authetication info.

How can I configure my GMail to send picture when DCS920 is scheduled?



 SMTP Server Address : smtp.gmail.com
 SMTP Server Port  (Default is 25) :587
 Sender E-mail Address: xxxx@gmail.com
 Receiver E-mail Address:  xxxx@hotmail.com
 User Name:  xxxx@gmail.com
 Password: ****** 

« Last Edit: February 23, 2010, 07:05:34 PM by penang-mushroom »
Logged

ECF

  • Administrator
  • Level 11 Member
  • *
  • Posts: 2692
Re: DCS920: SMTP settings: Can't send mail
« Reply #1 on: February 24, 2010, 09:14:33 AM »

unfortunately TLS or SSL security as not supported on this camera.
Logged
Never forget that only dead fish swim with the stream

penang-mushroom

  • Level 1 Member
  • *
  • Posts: 2
Re: DCS920: SMTP settings: Can't send mail
« Reply #2 on: February 25, 2010, 06:16:53 AM »

Poor..... means I can't use gmail, yahoo, hotmail mail server?
Now I can receive the scheduled image after configuring streamyx as the mail server.
Thanks for your help.
Logged

unhappy_customeer

  • Level 1 Member
  • *
  • Posts: 5
Re: DCS920: SMTP settings: Can't send mail
« Reply #3 on: March 10, 2010, 08:17:11 PM »

The email function on the DCS-920 does not work.
Logged

Mackerel

  • Level 3 Member
  • ***
  • Posts: 348
Re: DCS920: SMTP settings: Can't send mail
« Reply #4 on: March 11, 2010, 01:56:30 PM »

The email function on the DCS-920 does not work.

I works, but not on all types... 'Standard' SMTP is peachy!
Logged

meka

  • Level 1 Member
  • *
  • Posts: 2
Re: DCS920: SMTP settings: Can't send mail
« Reply #5 on: March 21, 2010, 08:40:46 PM »

 :o


hey  dlink  what is  this..???
i hope  that your engineer  publy  a newer firmware  supporting the secure authentification  i have a dcs 2121  but the mail notification can "t  work because gnerally the public  mail server use  the secured authent...
thancks you for  creating   this support in a newer  firmware ;)
Logged

Mackerel

  • Level 3 Member
  • ***
  • Posts: 348
Re: DCS920: SMTP settings: Can't send mail
« Reply #6 on: March 26, 2010, 09:34:37 PM »

The supported protocols are mentioned on the product-info on the website, on the box of the device and in the manual. If, for some reason, the protocol you need is not supported, then you can either:
1. Live for it and wait for a firmware-release, supporting the protocol, or
2. Return the item and look for one that does support your required protocol, or
3. Live with it and use other means or work-arounds (and there are plenty)

Ad 1. If the product is older, then the chances of an appropriate firmware-upgrade diminish with time... This means that options 2 or 3 are probably the only way to go. I have not seen that many IP-cams that support your required protocol.

So I wish you good luck, whatever way you are going in the future.

P.S. The subject of this thread relates to the DCS920... But same limitations apply, alas.
Logged