• March 28, 2024, 07:42:06 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Pages: [1] 2 3 ... 5

Author Topic: dcs-2330l is v1.14 or v1.12 latest firmware?  (Read 20034 times)

turnbui

  • Level 2 Member
  • **
  • Posts: 83
dcs-2330l is v1.14 or v1.12 latest firmware?
« on: December 14, 2016, 01:20:27 AM »

https://au.mydlink.com/download shows latest firmware v1.14 but http://support.dlink.com.au/Download/download.aspx?product=DCS-2330L shows v1.12 as latest. which is correct please? If v1.14 from which ftp site is it sourced?
« Last Edit: December 14, 2016, 01:36:50 AM by turnbui »
Logged

RYAT3

  • Level 10 Member
  • *****
  • Posts: 2254
Re: dcs-2330l is v1.14 or v1.12 latest firmware?
« Reply #1 on: December 14, 2016, 05:49:09 AM »

Not sure about your region, but I tried 1.14 and found the ir light was on in low power during the day and night when is supposed to be off.  Very bad for behind a window. I went back to 1.12
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: dcs-2330l is v1.14 or v1.12 latest firmware?
« Reply #2 on: December 14, 2016, 07:05:41 AM »

the MDL site would be the latest the D-Link Australia has to offer. There main support site may have not been updated to reflect v1.14.

I recommend if your camera is working, don't upgrade. You an try it and if it doesn't work out well, you can down grade back.

https://au.mydlink.com/download shows latest firmware v1.14 but http://support.dlink.com.au/Download/download.aspx?product=DCS-2330L shows v1.12 as latest. which is correct please? If v1.14 from which ftp site is it sourced?
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

turnbui

  • Level 2 Member
  • **
  • Posts: 83
Re: dcs-2330l is v1.14 or v1.12 latest firmware?
« Reply #3 on: December 14, 2016, 08:31:48 AM »

thanks folks. i'm having heaps problems with this cam ecen just trying to get it to connet wirelessly to netgear d630. anyone else? mydlink oniphone shows a red cross? any ideas? it has v1.12 according to packaging.
Logged

RYAT3

  • Level 10 Member
  • *****
  • Posts: 2254
Re: dcs-2330l is v1.14 or v1.12 latest firmware?
« Reply #4 on: December 14, 2016, 08:36:12 AM »

Did you mean netgear d6300?

Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: dcs-2330l is v1.14 or v1.12 latest firmware?
« Reply #5 on: December 14, 2016, 08:38:26 AM »

Can you connect to the camera if it's connected via LAN cable to the main host router and use a browser to connect to the IP address it gets from the main host router?

What wireless modes are you using on the main host router and security modes used?
What is the distance between the Camera and the main host router?
How many other wireless devices do you have connected to the main host router?
  • Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by that maybe causing interferences?
  • Any other WiFi routers in the area that maybe causing interferences? Link> Use a WiFi Scanner to find out. How many?

I recommend setting a static IP address ON the cameras outside of the main host routers default DHCP IP address pool as a troubleshooting step: 192.168.#.23  DHCP

thanks folks. i'm having heaps problems with this cam ecen just trying to get it to connet wirelessly to netgear d630. anyone else? mydlink oniphone shows a red cross? any ideas? it has v1.12 according to packaging.
« Last Edit: December 14, 2016, 08:41:01 AM by FurryNutz »
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

turnbui

  • Level 2 Member
  • **
  • Posts: 83
Re: dcs-2330l is v1.14 or v1.12 latest firmware?
« Reply #6 on: December 14, 2016, 09:15:10 AM »

yes d6300 sorry.
Can you connect to the camera if it's connected via LAN cable to the main host router and use a browser to connect to the IP address it gets from the main host router? yes
wpa2-tkip
1 meter away
thanks i'll try static IP

i'm trying to manage for my sister in Australia and i'm in uk. please bear with me.
thanks for the hep.
Logged

turnbui

  • Level 2 Member
  • **
  • Posts: 83
Re: dcs-2330l is v1.14 or v1.12 latest firmware?
« Reply #7 on: December 14, 2016, 09:20:20 AM »

btw i'm doing this on a Mac not windows.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: dcs-2330l is v1.14 or v1.12 latest firmware?
« Reply #8 on: December 14, 2016, 09:27:33 AM »

Can you set AES or Mixed TPIK and AES on the main host router? AES is preferred mode.
If on Mac, use FF browser for best configuration with the camera if you can.
See if the camera will connect to the 5Ghz radio as well...
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

turnbui

  • Level 2 Member
  • **
  • Posts: 83
Re: dcs-2330l is v1.14 or v1.12 latest firmware?
« Reply #9 on: December 14, 2016, 11:20:21 AM »

ok i'll liase and get back soon as. i read somewhere to release camera in web portal?? couldn't see option?
i amusing chrome not safari. getting firefox might be out of her capabilities but will try.
thanks again
« Last Edit: December 14, 2016, 11:23:23 AM by turnbui »
Logged

RYAT3

  • Level 10 Member
  • *****
  • Posts: 2254
Re: dcs-2330l is v1.14 or v1.12 latest firmware?
« Reply #10 on: December 14, 2016, 11:54:19 AM »

If she can wire the camera to the router, and open port 80, you should be able to login to the camera.

There might also be an option to remote admin the router.
Logged

turnbui

  • Level 2 Member
  • **
  • Posts: 83
Re: dcs-2330l is v1.14 or v1.12 latest firmware?
« Reply #11 on: December 14, 2016, 11:56:20 AM »

 i read somewhere to release camera in web portal?? couldn't see option?

is there somewhere to do this or remove whole account to start again and run the config to create a/c and specify 5G network.
btw it is set wpa2 AES not TKIP.

yes i have router remote admin - thanks
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: dcs-2330l is v1.14 or v1.12 latest firmware?
« Reply #12 on: December 14, 2016, 12:15:39 PM »

You might try just factory reset the camera. Then go thru the set up wizard.

One thing you can do while your working remotely and might be helpful, try using www.teamviewer.com. It's a safe remote access program between two PCs. I use it all the time when I need to help out others with router problems and can't be there on site.

If you can gain access to the camera while it's connected while the camera is LAN cable connected to the router, you should be able to go into it's web page and configure the wireless networking to connect to a different SSID name  for 5Ghz. Be sure that your main host router is running N mode on 5Ghz.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

turnbui

  • Level 2 Member
  • **
  • Posts: 83
Re: dcs-2330l is v1.14 or v1.12 latest firmware?
« Reply #13 on: December 14, 2016, 12:18:58 PM »

fantastic. thanks. she's tied up for next 2 days so can't do much. will update soon as.
very helpful - magic. cheers

this teamviewer is it poss PC 2 Mac?
« Last Edit: December 14, 2016, 12:22:10 PM by turnbui »
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: dcs-2330l is v1.14 or v1.12 latest firmware?
« Reply #14 on: December 14, 2016, 12:26:15 PM »

Yes and mixed between mac and windows too.  ;)
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.
Pages: [1] 2 3 ... 5