D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => DIR-505 => Topic started by: calvin69 on June 21, 2012, 06:08:33 PM
-
How can i upgrade DIR-505 firmware over the cable and not wife as recommended?
I just purchased the DLink all in one companion DIR-505 with firmware version 1.01 and i want to update to 1.02 available online. There is a note saying to NOT update over wifi, you should only update connected thru a cable.
I could not find in the pdf manual how to connect to my PC using a cable.
I configured 505 to router and plugged the Ethernet cable from my router but my computer cannot ping or connect to the DIR-505 thru the browser. I can only connect to 505 thru the wifi.
Thanks
-
I recommend using the router as is before updating. If the router is working well then keep what is loaded. Is there any problems with it at this time?
When you use a LAN cable, your PC should get an IP address from the router and then you should be able to log into the routers web page at 192.168.0.1. Make sure your PCs network settings are set up to automatically obtain IP addressing.
-
It looks like the DIR-505 has a USB port. Did you try placing the FW on a USB thumb drive and uploading?
-
One good reason not to use it with the factory firmware is that the factory firmware doesn't work all that well, at least based on my efforts.
To update the firmware, download the firmware separately. Set the DIR-505 to Hotspot mode and connect your computer by Ethernet to the DIR-505. You'll then be able to log in and do the update. I did this yesterday.
The USB port has no function here - it's simply for external storage that you can access from clients.
By the way, when will the DIR-505 get a forum section of its own?
-
Just tried to update .... twice. And the firmware shows uploading but then the control panel keeps saying 1.01. Any hints? It's working ok right now but I don't want it to encounter a problem later.
Tried this from my laptop plugged into the ethernet port -- wired. It even showed the percentages uploading and told me to wait about 240 seconds or thereabouts.
I really like this gadget. Gonna put it to a real test in the car tomorrow and serve movies to the kids' ipods. Did a test run tonight and it was AWESOME.
-
You're doing it the right way - I don't know why it isn't working for you. I had no trouble with the update. Did you see the DIR-505 reboot (LED turns red for a while then green again)? Did you close and reopen the admin page? You might be seeing a cached page in your browser.
-
Yes. Everything did like it's supposed to do. I'll keep trying.
-
Read manual and download the firmware in HDD, logged onto DIR 505 and upload anyway.
-
FW Update Process (http://forums.dlink.com/index.php?topic=42457.0)
-
Though I would just drop a line to add another voice.
First of all le me say that Im trying to use the Dir 505 with an Android 2.3 device,
First let me address Upgrading the Firmware.
*** First, Download the DIR505 firmware Update file to you PC Desktop.)))
The DIR 505 must be connected directly to you PC Computer to update the Firmware.
Unplug the internet Ethernet cord from your PC.
The Ethernet Cord must the between the PC Ethernet Plug and the DIR 505 Ethernet Plug.
Once you plug the Ethernet cord between PC and Dir 505 you can create the communucaton link needed to Upgrade the Firmware
Open a browser (ie/firefox/chrome) on your PC.
In the browser address window type: http://192.168.0.1 (or http://dlinkrouter) ( An orangish D-link page should load )
Click On the Maintanance tab on the Top of page (a Maintanance page loads)
Take a look to the Left side of page and Click on the FIRMWARE link
Click on the Load/Browse button and Find/CLICK the dir505_fw_101.bin file (on your desktop)
Click the Upload button. Wait 3 minutes until done.
-
Where can I download Dir 505 firmware version 1.02 ?
When I go to the Dur 505 support page. It says the latest version is 1.01 (not 1.02)
http://dlink.com/us/en/home-solutions/support/product/dir-505-shareport-mobile-companion
Please supply a link or directions to download the firmware version 1.02 (if it really exists).
Thanks in advance.
-
It's highly recommended to run the unit with out updating if your not experiencing any issues. If the v1.02 is not posted then it's not meant for release to public as of yet and you'd be using any thing not published on the web site at your own risk.
-
Interesting. 1.02 had been posted, as that's what I installed from the Dlink support site. But it was withdrawn. I wonder what happened to it. Maybe the frequent disconnects I see were the problem. But I could not get 1.01 to work at all.
-
Possible faulty unit you had? Did you get v1.02 to work any?
-
1.02 mostly works for me. I don't think the hardware is faulty.
-
Mostly?
Have you tried going back to v1.01?
-
If you would like to update the DIR-505 using a hard wire, please set the device in Wi-Fi hotspot mode. Then connect the ethernet cable directly to your computer and log in using http://dlinkrouter. Then you can upgrade the firmware that way. Plus it's much faster