D-Link Forums
D-Link IP Cameras for Home => DCS-8300LH => Topic started by: morkfard on September 24, 2018, 04:52:49 AM
-
Hi I'm trying to aggregate feeds from multiple cameras, and I heard that this product can support RTSP in another forum. However, the documentation leaves much to be desired, and it only speaks to the app. I'm specifically trying to find the RTSP path for the video stream. Thoughts? I'm going to contact support but thought I'd ask here first. I'll post my findings if I succeed, but please post any insights.
-
Unfortunately the DCS-8xxxLH series removed HTTP/RTSP support and can only be accessed by the mydlink app.
-
Thanks for the quick reply. That seems pretty arbitrary. I’ll see what support comes back with to see if there’s an update to that. If RTSP is removed, I’ll have to return this. It would be a shame because it seems pretty decent so far.
Requiring an app basically says that I need an Android or iOS phone to view video, which is pretty restrictive for something I paid money for.
Again, I’ll find out more and post any updates. Thanks again.
-
Well, I basically got the “Sorry ‘bout cha” talk for DLink customer support. Granted that support cannot do anything. Hopefully this will warn people off this product whom have the same use-case as me. Basically, I have other non-DLink camera that I want to have centralized viewing access. Now, I’ll probably return this camera, but it’s a shame since RTSP used to be supported. Seems like a money grab to me since the protocol is pretty basic. Hopefully, DLink comes to its senses on this. Doubtful.
-
I completely understand you returning the camera if it does not fit your needs. I am sure they removed it for security reasons just on this line (I was surprised they removed it too). Hopefully in the future they will include RTSP, at least as an option to turn on/off and port selection. Plus remember these are consumer cameras and probably 90%+ of customers do not know what RTSP is. So, not really a cash grab.
-
Yeah, you are right. Just a little peeved on my end. I would like the option to be more of a power user accepting the security risks. Thanks for being responsive.
-
No prob and I understand being peeved. I know with this line of cameras they wanted it to be simplified app-only for the customers but unfortunately the advanced users get limited usability. We have addressed this with the camera group and vendor so they are aware.
-
Hi,
Any news on this? Has RTSP been enabled? I want to use this camera with Synology Surveillance Station.
-
Not on the 8300LH unfortunately. This last firmware release added streaming support on other dcs-8xxxLH cameras but not the 8300. I assume the next firmware release will have it but I will double-check. Not sure why they wouldn't have added it unless it is a different vendor from the other models.
-
Dont update firmware and use the following URLS.
FULL HD: rtsp://admin:admin@[ip addr]:554/stream1
720p: rtsp://admin:admin@[ip addr]:554/stream2
-
Thanks @roycruse.
Can anyone please confirm if these RTSP URLs still work with the latest firmware?
-
I tried it, without any result. I am not sure which username/password I have to use. My standard login name is not working.
-
Not on the 8300LH unfortunately. This last firmware release added streaming support on other dcs-8xxxLH cameras but not the 8300. I assume the next firmware release will have it but I will double-check. Not sure why they wouldn't have added it unless it is a different vendor from the other models.
Hello, i want to find a camera working with google home AND rstp (for synology).
Impossible to find one. Can you give the models wich support the stream with the last firmware ? it tried the firmware changelog in every DCS-8XXX camera but didn't find anything... thanks !
-
The DCS-8xxxLH series cameras will not support RTSP for 3rd party apps or NVR support. They will work with Google Home. Older models will work - The DCS-936L (same as the DCS-8010LH) and the DCS-5030L (similar to the DCS-8525LH) will support Google Home and work with 3rd party NVR and apps. Actually all D-Link's cameras except the 8xxxLH series do support RTSP but not all support Google Home.
-
I tried it, without any result. I am not sure which username/password I have to use. My standard login name is not working.
Here are the information you need to enter to get the RTSP to work with video.
rtsp://admin:<pincode>@192.168.5.145:554/stream1
The pincode is on the ID tag on the bottom of the camera mount. Hope this helps :)
-
The PIN code shown on the bottom of the camera does not work as the password. The RTSP authentication window appears with 'admin' as login and it keeps re-prompting for the password when I enter the PIN from the bottom of the camera.
I believe I am using the correct format and the IP address of the camera I verified as correct
'rtsp://admin:PIN@192.168.0.168:554/stream1'
Am I missing something?
Thanks.
-
I have been trying the same with this camera using the following:
rtsp://admin:<pincode>@[IPADDRESS]/stream1
It seems the newest firmware does get prompted for user/pass but something has changed. admin + pincode is no longer the correct combination.
It might be possible they have change the user to something else perhaps? If not they just might have closed that other clients then the app can access the stream. Does someone know what they changed exactly in the firmware?
If someone has a rooted android and can do a tcpdump, that might give a clue to the changes.
-
Finally opened the box to my DCS-8010LH, bought it about 2 years ago. I bought it because of the HD video, but I didn't realize it doesn't have an ethernet connection. I had to download the stupid mydlink app on my phone to configure the camera, on a router that IS NOT connected to the internet (but my phone is). Basically, the cam configuration is done over Bluetooth LE and I spent hours trying to configure it WITHOUT the mydlink app following this guide:
https://github.com/bmork/defogger (for the 8000LH)
I can connect via BT from the command line with bluetoothctl (ubuntu 18.04) and query the camera, but I couldn't configure it so I downloaded the mydlink app.
Not much info out there but my camera has FW version 1.0 and I was able to grab the rtsp feed with vlc using:
rtsp://IP_OF_CAM/stream1 -- HD
rtsp://IP_OF_CAM/stream2 -- 720p
user: admin
password: admin
You can also grab JPEGs with http://IP_OF_CAM/jpeg.cgi
I'm still working on getting an H264 feed via HTTP.
-
I notice a new firmware update 1.09.01(3.5.19-b01)
And now the device opens ports 554, 7000, 8080, 8081 but I wasn't able to connect to ANY of those ports.
on the RTSP port I cannot authenticate with admin as user and the pin (that ti can find at the bottom stick)
Any news??
-
On firmware 1.09 i'm having the same issue: it seems they open back again the port 554!!! but I can't authenticate into the camera... :(
I have been trying the same with this camera using the following:
rtsp://admin:<pincode>@[IPADDRESS]/stream1
It seems the newest firmware does get prompted for user/pass but something has changed. admin + pincode is no longer the correct combination.
It might be possible they have change the user to something else perhaps? If not they just might have closed that other clients then the app can access the stream. Does someone know what they changed exactly in the firmware?
If someone has a rooted android and can do a tcpdump, that might give a clue to the changes.
-
Guys I have a great news for you. ;D You got it right, the stream works, but you've been just opening the wrong URL!
The correct path is stream2, not stream1:
rtsp://admin:YOUR_PIN@CAMERA_IP/stream2
I've tested this on Firmware 1.09.01(3.5.19-b01).
-
Sorry to keep this thread going, but I'm looking to grab a used DCS 5030L to integrate into HA, which I'm new to as well, so I just wanted to make sure that this rtsp url will work, if anyone could confirm please? I saw that DLINK wifi cams support the protocol, so I'm guessing a generic integration should be fine. Also, any input on their experience with HA (even for different models) would be appreciated too.
-
DCS-8526LH also do not have RTSP nor WEB interface. unfortunately I also have to return the units to seller.