• March 29, 2024, 08:09:31 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: problem with wireless in windows 10  (Read 3678 times)

mostafa

  • Level 1 Member
  • *
  • Posts: 2
problem with wireless in windows 10
« on: July 16, 2016, 01:05:50 PM »

Hello    evey body
I don't connect to wifi because the wifi network isn't be identified in my labtop but I can connect to it by my phone . I connect by my phone to router setting (192.168.1.1) and in Wireless Setup I go to Manual Wireless Network Setup and tap to Apply Setting then wifi network is be identified in my labtop and now I connet to network   

Router Details :
Model : DSL-2600U
H/W Ver. : Z1
firmware  ver. : 1.0.0

Thank You !  :D
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: problem with wireless in windows 10
« Reply #1 on: July 16, 2016, 01:14:08 PM »

Link>Welcome!

  • What region are you located?

Wireless Configurations
Links>Wireless Installation Considerations and Managing Signal Congestion and Good Neighbour Policy
  • Ensure the default (dlink) SSID name is changed. Ensure that different SSID names are used between each WiFi 2.4/5Ghz radios. Can be anything and not something that's already in use by any neighbouring WiFi routers. Under Setup/Wireless/Manual.
  • What wireless modes are you using?
  • 2.4Ghz Routers only: Try single mode G or N or mixed G and N?
  • Channel Width set for Auto 20/40Mhz or try 20Mhz only.
  • Try setting a manual Channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear. 13 for EU regions. Try channel 48 or 149 on 5Ghz.
  • What security mode are you using? Preferred security is WPA-Personal. WPA2/AES Only. Some WiFi adapters don't support AES, so you might want to try TPIK only or Auto TPIK and AES.
  • Ensure any devices with WiFi adapter drivers are updated.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

mostafa

  • Level 1 Member
  • *
  • Posts: 2
Re: problem with wireless in windows 10
« Reply #2 on: July 20, 2016, 11:42:47 AM »

Thank you for the reply.
Middle East - Iran
I tried all of them but my problem has not been solved .
my Wireless setup
http://s1.picofile.com/file/8260550468/dsl_2600u.PNG
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: problem with wireless in windows 10
« Reply #3 on: July 20, 2016, 01:08:03 PM »

Any chance that you can test a Windows 7 laptop as a test to see if the problem happens there as well? Seen various problems with Windows 10 and it's networking handling.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.