D-Link Wireless Access Points For Business > DAP-2360

Home-Network connection prob with DAP-2360 Rev. B1

(1/1)

go4java:
Hi,
I've already running 2 other DAP-2360 in my home network and now trying to connect another AP.
The 2360 has the latest firmware and I was able to connect/configure with my notebook.
Prior to the f/w, I've been resetting the box completely, with login: admin/blank.
Then I opened the basic settings to choose "get IP from DHCP" (from my Fritz 7490 router) and was able to SAVE this setting.
Then I directly confirmed again with "SAVE config" from the top level navigation.
After 60s, I entered the GUI again and this setting has not been saved (it was static IP again). Why?

FurryNutz:
Link>Welcome!


* What Hardware version is your DAP? Look at the sticker under the DAP.
* Link>What Firmware version is currently loaded? Found on the DAPs web page under status.
* What region are you located?
What browser are you using? Try IE11 or FF.

go4java:
thx, found the problem. Cable was defect. Replaced and everything  works fine now. With same SSID and wpa password for all 3 devices. Channels 1, 7 and 13. Have a good day

FurryNutz:
Glad you found the problem.
Enjoy.

Navigation

[0] Message Index