D-Link Forums
The Graveyard - Products No Longer Supported => D-Link Storage => DNS-320L => Topic started by: adwilliams2020 on June 06, 2013, 04:45:53 PM
-
Hi Everyone
I have a problem...and I've tried everything!!
I'm running a ShareCentre DNS-320L and have just installed a new WD 3TB Green Harddrive (which is on the capability list). I cannot get the drive to format. It detects the new drive and when you select "Format the new drive as Standard type" The initalize process works, but when it starts to format it hangs at 0%.
WHen you try and navigate around the UI after selecting cancel, my other WD 1TB drive is not shown anymore. You can't access it from the network, you can't see it in the file browser and the status bar is missing from the left for this drive. It actually says "None Hard Drives". When you restart the ShareCentre, the 1TB drive comes back. I have tried formatting the new disk with the 1TB removed as well.
I have tried the harddrive through USB to my laptop and it works fine.
Is there any other way have formatting it to the same type as the SHareCentre accepts? Is it EXT3? Can I use a Linux machine to format it and does anyone know how to do this?
Also, could it be the firmwave version. I'm using 2.03, but can't seem to downgrade back down to try it there?
Any help would be very much appreciated. I would like to get my system up and running as soon as possible.
Cheers
Andy (Solihull, Nr Birmingham, UK)
-
Hello
I have the same hard drive, and it runs without any problems. My main concern is your firmware. Where did you get version 2.03? As far as I know, the latest official firmware for the DNS-320L is 1.02b07. Maybe you installed firmware for the DNS-320, which is an older model. If that's the case, then you need to install the correct firmware on the NAS.
-
Do you own a DNS-320 or DNS-320L? The DNS-320 is the only D-Link NAS currently supporting a firmware v2.03 release.