• July 02, 2022, 10:32:39 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: No Server Found - dsm520  (Read 5282 times)

gjboehm

  • Guest
No Server Found - dsm520
« on: December 23, 2007, 09:09:57 PM »

I have tried everything I can think of and am now using an ethernet connection but the 520 still gives me the no server found message.  I have verified:

1.  UPnP on both the router and XP.
2.  Configured Windows One Care - though confusiing
3.  Have manually allowed the various servers - WMP 11 and DLINK Media Server
4.  I do have an Internet connection and can play internet music.

I have read everything I can find.  Can anyone help?

Thanks
Logged

Willobee

  • Level 2 Member
  • **
  • Posts: 38
Re: No Server Found - dsm520
« Reply #1 on: December 24, 2007, 08:36:23 PM »

If you are trying to use WMP11 as a server you must first allow the DSM520 into the software. This link will show you how to do that
http://support.dlink.com/faq/view.asp?prod_id=2692&question=DSM-120%20/%20DSM-320%20/%20DSM-320RD%20/%20DSM-510%20/%20DSM-520
Once you have done that WMP11 will serve media to your DSM520 if they are on the same network.
When you select My Media from the home menu on the DSM520 a list of media servers should be listed. I have noticed the message "No Servers Found" when I first go to this screen but after a few seconds my media servers finally show up in the list. If you are using your PC as the server the name of your PC will be in the list.
If you have allowed the DSM520 into the WMP11 software and still have the "No Server Found" problem then I would look at the network setup and make sure the DSM520 is connected to the network. Make sure the DSM520 is connected to the same network as the PC.
Is there a firewall in your router or PC that is blocking the DSM520? You should be able to allow the DSM520's IP address to pass through the firewall.
I hope this info helps.
Logged

ECF

  • Poweruser
  • Level 11 Member
  • *****
  • Posts: 2692
Re: No Server Found - dsm520
« Reply #2 on: December 26, 2007, 10:40:29 AM »

Please make sure your DSM-520 is in the same network range as you PC. Are you able to successfully Ping the DSM-520 in the command prompt?

Ping test instructions
1. Click “Start” and goto “Run”
2. Type “cmd” and press Enter
3. Type”ping 192.168.xxx.xxx” (IP address of the device you are tying to ping test)
You should get 4 replys back.
Logged
Never forget that only dead fish swim with the stream

chenrikson

  • Level 1 Member
  • *
  • Posts: 13
Re: No Server Found - dsm520
« Reply #3 on: January 02, 2008, 08:00:40 AM »

If the above doesn't work you might try uninstalling OneCare as it is known to sometimes cause problems with server software, even if correct permissions are set.
Logged