D-Link Forums
The Graveyard - Products No Longer Supported => D-Link Multimedia and USB => DSM-520 => Topic started by: hthoene on February 23, 2008, 12:39:12 PM
-
I just installed the latest Active TV server version on my Windows Vista desktop, connected to my DSM-520.
The installation works, and using the Active TV client on the PC works fine too.
When I connect with the DSM-520 to the Active TV server the connection works fine, and it comes up with the main navigation screen. But on my LCD screen (connected via HDMI to the DSM) I only see a small portion (upper left) of the actual screen - hugely enlarged. When I click the "menu" key to exit, it briefly shows the screen in normal size and then exits.
Any idea what I could do to solve this?
Thanks
Hermann
-
I also have the same problem.
-
Try changing the resolution on your television try it in 1080P and 720p or 720i.
-
I got the same problem but I have a regular analog TV. How do I adjust the resolution ?
-
Hmm I have never herd of this being possible connected analog. Do you have the latest version of ActiveTV release 1.30.08 version 2.54.2926?
-
ok, after the comments I figured out my problem:
I had my DSM-520 set to HDMI output, but actually I was using the Composite output to connect to the flat screen.
After I changed the settings on the 520 to "Composite, 1080i" the picture looks now perfect with Active TV.
I did some more testing by using an HDMI cable to connect to the TV (and setting the 520 to HDMI output). However - with that setting I still had some display problems - I saw 3/4 of the screen, but a bit was still cut off on the right side.
Looks like Active TV is much more sensitive about different output settings etc. then the DSM-520 in general - as all multi-media content worked fine before.
/Hermann