• April 13, 2021, 07:50:08 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Management Interface  (Read 2541 times)

marco9230

  • Level 1 Member
  • *
  • Posts: 3
Management Interface
« on: July 13, 2020, 12:11:47 PM »

I have configured multiple IP addresses in a switch DGS-1510 (DGS-1510-28/L3 Features/IPv4 Interface). How can I set the management interface to one of these addresses? I have not found any information about this in the user manual or in the CLI reference.
 
Thank you very much

marco9230
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49572
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Management Interface
« Reply #1 on: July 13, 2020, 04:17:34 PM »

I know for my DGS-1100, I can set any IP address for the switch, i.e. 192.168.0.11 and I use this to get to the switches management page. I presume this can be done for the 1510 as well. Just find where to set the switches default IP address and use that for your management page address.
Logged
Cable: 1Gb/50Mb>NetGear CAX80>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

marco9230

  • Level 1 Member
  • *
  • Posts: 3
Re: Management Interface
« Reply #2 on: July 14, 2020, 08:57:17 PM »

Thank you for your prompt reaction.

This is exactly what I expect and is in line with my experience with the switches of the DGS-1210 series.

I have configured several VLANs with IP addresses on the switch:
 - VLAN 1 with the address 192.168.1.10
 - VLAN 10 with the address 192.168.10.10
 - VLAN 20 with the address 192.168.20.10
 - VLAN 30 with the address 192.168.30.10

The management interface is currently located at 192.168.10.10.
I want to move it to the address 192.168.1.10 on the default-VLAN.

So far without success I have tried the following steps:

- I have searched for a configuration possibility for the default address of the switch in the GUI and the CLI.

- I have searched the GUI with different browsers.

- I searched in the current configuration for a definition for the current management interface address to overwrite it.

- I have set the management interface to 192.168.1.10 with the GUI-wizzard. The wizzard finishes its work without errors, but the management interface remains at 192.168.10.10.

Only if I disable the address 192.168.10.10 on the switch, the management interface changes to 192.168.1.10.

Obviously i did not understand something here?

Thank you very much.

marco9230       
« Last Edit: July 14, 2020, 09:04:34 PM by marco9230 »
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49572
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Management Interface
« Reply #3 on: July 14, 2020, 09:24:29 PM »

I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this.
Link> Tech Support Contact Information
We find that phone contact has better immediate results over using email.
Let us know how it goes please.
Logged
Cable: 1Gb/50Mb>NetGear CAX80>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

marco9230

  • Level 1 Member
  • *
  • Posts: 3
Re: Management Interface
« Reply #4 on: August 17, 2020, 11:22:58 AM »

from the D-Link support:

Since the DGS-1510-xx is a Layer 3 Switch, there is no dedicated option for Management VLAN/Interface.
All IP Interfaces (Addresses) can be the management, as long as they are reachable.


this is true and help!

thank you
marco
Logged